Damixa 770250000 [10/12] Origin bit

ORIGIN BIT

Installation of basin mixer

1. Turn off the water system.

2. Attach a flexible connection to the mixer.

3. Important! Screw the flexible eyeliner into the body of the mixer only manually, without any tools and

excessive force to avoid damage.

4. Secure the mixer to the sanitary fixture using the supplied hardware.

5. Connect the flexible supply pipe to the water supply system: the right supply hose to the cold water

supply, and the left one - hot.

6. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid

clogging at the first water start.

7. Turn on the water supply system, check tightness of all connections when the mixer is closed. If

necessary, tighten and seal the connections.

8. Open hot and cold water supply for a while, then close water supply and install (twist) the aerator in place.

Care recommendations

Modern plumbing equipment, kitchen and shower faucets are made of a variety of materials depending

on the functional features and design that are in demand in the market. To avoid damage when cleaning

take certain criteria into account.

Mixer care products

Cleaning agents are required to remove lime deposits.

Follow these rules during cleaning:

1. Never use products containing hydrochloric, formic or acetic acid, as they can cause significant damage.

2. For the same reasons, it is recommended to use phosphoric acid on a limited scale.

3. Never mix different cleaning products.

4. Never use abrasive cleaners or devices (for example, some cleaning powders and microfiber sponges).

Mixers care recommendations

Follow the instructions of the manufacturer of cleaners, as well as the following rules for their use:

1. Use cleaning agents when required, according to the instructions for use.

2. The dosage and duration of treatment with cleaning agents should be selected taking into account

characteristics of the product (mixers should not be exposed to cleaning agents longer than required).

3. Regular care can prevent calcification.

4. When using aerosol cleaners, spray them onto a special cloth or sponge and never direct directly onto

plumbing equipment, since droplets of the aerosol can damage it by hitting the holes or slots in the

equipment.

5. Immediately after cleaning, wash off the chemicals with clean water in order to completely get rid of

the residues of the product.

Important notes

Any residual liquid soap, shampoo or shower gel can also cause damage. To avoid this, wash them

thoroughly with clean water. The impact of cleaning products on damaged surfaces increases the area

of damage.

Our warranty does not cover any damage resulting from improper handling.