Caso AirFry Chef 1700 [30/58] Please note

Caso AirFry Chef 1700 [30/58] Please note
30
Please note
If possible, keep the original packaging for the device for the duration of the
guarantee period of the device, in order that the device can be re-packaged
properly in the event of a guarantee claim.
13.4.1 Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup
location must fulfil the following prerequisites:
Place the device on a firm, flat, level and heat-resistant surface with sufficient
load-bearing capacity for the device and its contents.
Dot not place the device on a metal surface.
Choose the setup location in such a way that children cannot reach any hot
surfaces on the device.
The device is not intended to be installed in a wall or a built-in cupboard.
Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
Do not place the device near a gas or electric cooker or an oven.
The device requires an adequate flow of air in order to operate correctly. Make
sure that the back of the device is at least 10 cm away from the wall. Keep 10 cm
free space at the other sides of the device.
Do not cover up any openings on the device and do not block these off.
The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
The device and power cord should not come in contact with hot surfaces. The
device could be damaged.
The installation and assembly of this device in non-stationary setup locations must
be carried out by specialist companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
13.5 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate with those of your electrical network. This data must
agree in order that no damages occur in the device. If in doubt, ask your qualified
electrician.
The connection between the device and the electrical network may employ a 3
meter long (max.) extension cable with a cross-section of 1.5 mm². The use of
multiple plugs or gangs is prohibited because of the danger of fire that is involved
with this.
Make sure that the power cable is undamaged and has not been installed under
the oven or over hot or sharp surfaces.
The electrical outlet must be protected by a 16A safety cut-out switch, separately
from other electricity consumers.
The electrical safety of the device is only guaranteed if the device is connected to
a properly installed protective conductor system. If in doubt, have the house
installation checked over by a qualified electrician.

Содержание

Похожие устройства

Скачать