Atlantic 850303 [30/32] Recommendations for use

30

After calibrating the temperature value, the position of the symbol will change, i.e. the wheel will be in

the end position, but not opposite the symbol; however

the final temperature will also be the anti-freezing temperature, i.e. 7 °C

(the last two divisions on the wheel always correspond to anti-freezing

mode).

In the example given above, in which the calibration value was –1 °C,

If the calibration value is +3 °C, the end position of the wheel will correspond to a value of 15 °C;

nevertheless the anti-freezing temperature will be 7 °C.

Restoring to factory settings

This device comes with restore to factory settings option. To do so, turn the

temperature control wheel d to the end position (opposite the clock hand).

Turn the outer disc of wheel d, while holding the central part.

Turn the outer disc so that the mark is positioned

opposite the symbol. Then turn the outer disc of the wheel to its initial position.

and the temperature control wheel d to the position. The device will maintain a temperature of

7 °C (±3 °C).

-

The device is equipped with an alert function if the room temperature drops below

3 °C. In this case indicator light B will start to flash red . To prevent any deterioration in the room

conditions, it is recommended to set the device to mode.