Midea MDRM691MIE28 [9/104] Leveling doors

Leveling feet

To avoid vibration, the unit must be leveled.

If required, adjust the leveling screws to compensate for the uneven oor.

The front should be slightly higher than the rear to aid in door closing.

Leveling screws can be turned easily by tipping the cabinet slightly.

Turn the leveling screws counterclockwise

to raise the unit, clockwise to

lower it.

Leveling doors

• Precautions before operation:

Before operation of accessories,it shall be ensured that the refrigerator is

disconnected from power.

Before adjusting the door ,precautions shall be taken to prevent any personal

injury.

• Schematic diagram of leveling the door body

：

• Raise the lower door up to the level of the higher door;

• Insert the supplied fastener-ring by using plier in the gap between the hinge-

grommet and the lower hinge.The number of fasten-rings you will need to

insert depends on the gap.

Moving the appliance

1. Remove all food from inside the appliance.

2. Pull the power plug out, insert and x it into the power plug hook at the rear or

on top of the appliance.

3. Tape parts such as shelves and the door handle to prevent from falling off

while moving the appliance.

4. Move the appliance with more than two people carefully. When transporting

the appliance over a long distance, keep the appliance upright.

5. After installing the appliance, connect the power plug into a socket out to

switch on the appliance.

Precautions before operation:

Before making changes the refrigerator must be disconnected from power.

precautions should be taken to prevent any personal injury.

ATTENTION

Lower hinge

Hinge

grommet

Fastener-ring

Pliers