Damixa 360280000 [26/32] Scandinavian pure

Damixa 360290300 [26/32] Scandinavian pure
SCANDINAVIAN PURE
26
Installation of basin/high mixer
1. Turn o󰀨 the water system.
2. Attach a exible connection to the mixer.
3. Important! Screw the exible eyeliner into the body of the mixer only manually, without any tools
and excessive force to avoid damage.
4. Secure the mixer to the sanitary xture using the supplied hardware.
5. Connect the exible supply pipe to the water supply system: the right supply hose to the cold
water supply, and the left one - hot.
6. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid
clogging at the rst water start.
7. Turn on the water supply system, check tightness of all connections when the mixer is closed.
If necessary, tighten and seal the connections.
8. Open hot and cold water supply for a while, then close water supply and install (twist) the aerator in place.
Installation of shower/bath and shower mixer/with thermostat
1. Turn o󰀨 the water system. Screw eccentric adapters into the pipes of water supply system,
having previously sealed the threaded part with an insulating material. Select position of the
eccentric adapters, where they coincide and correspond to the connecting position of the mixer.
The mixer should be placed horizontally.
2. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid
clogging at the rst start-up of water.
3. Install decorative sockets on the eccentric adapters and, using a tool with soft lining, attach the
mixer body. Screw the spout for the bath/shower mixer with long spout.
4. Turn on the water supply system, check tightness of all connections when the mixer is closed.
If necessary, tighten and seal the connections.
5. Open hot and cold water supply for a while, then close water supply and install (twist) the
aerator in place.
6. For mixers with thermostat. Before installing the mixer, it is necessary to equalize the pressure
of cold and hot water with the help of valves regulating the water supply to the room.
Installation of concealed basin/shower/bath and shower mixer
1. Disconnect your water supply system.
2. Make sure the installation niche has right size. Important! Make sure to connect the hot/cold
inlet pipe correctly (If standing in front, hot water pipe connecting to the left& cold water pipe
connecting to the right). Shower output should be directed upwards.
3. Connect the main body & water supply pipe with water inlet pipe without handle and wall plate.
4. Start the water supply system with the mixer in «closed» position and make sure that all
connections are tight. Perform additional connections tightening and sealing if necessary.
5. Install wall plate and mixer handle.
6. For mixers with sidespray. Install hygienic spray by using hose.

Содержание

Скачать