Damixa 400250000 [13/16] Merkur

MERKUR

Installation of basin/high mixer

1. Turn o󰀨 the water system.

2. Attach a exible connection to the mixer.

3. Important! Screw the exible eyeliner into the body of the mixer only manually, without any tools

and excessive force to avoid damage.

4. Secure the mixer to the sanitary xture using the supplied hardware.

5. Connect the exible supply pipe to the water supply system: the right supply hose to the cold

water supply, and the left one - hot.

6. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid

clogging at the rst water start.

7. Turn on the water supply system, check tightness of all connections when the mixer is closed.

If necessary, tighten and seal the connections.

8. Open hot and cold water supply for a while, then close water supply and install (twist) the

aerator in place.

Installation of shower/bath and shower mixer

1. Turn o󰀨 the water system. Screw eccentric adapters into the pipes of water supply system,

having previously sealed the threaded part with an insulating material. Select position of the

eccentric adapters, where they coincide and correspond to the connecting position of the mixer.

The mixer should be placed horizontally.

2. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid

clogging at the rst start-up of water.

3. Install decorative sockets on the eccentric adapters and, using a soft grip, attach the mixer

body. Screw the spout for the bath/shower mixer with long spout.

4. Turn on the water supply system, check tightness of all connections when the mixer is closed.

If it is necessary, tighten and seal the connections.

5. Open hot and cold water supply for a while, then close water supply and install (twist) the

aerator in place.