Home
Главная
Centek
Холодильник
CT-1749 Inox
Инструкция по эксплуатации Страница: 22

Centek CT-1749 Inox Инструкция по эксплуатации онлайн [22/28] 810062

Centek CT-1750 Black Инструкция по эксплуатации онлайн [22/28] 810064

– the power socket and plug should be of the same type; if the plug does not fit

the socket the latter should be replaced with one compatible with the plug

(this work should be performed by a skilled electrician).

The refrigerator should be placed so that you would always have access to

the power socket. A refrigerator improperly connected to power supply, i.e.

incompliant with the requirements for powerful home appliances set forth in

this manual, is potentially dangerous. The manufacturer shall not be made liable

for damage to human health and property if such damage is caused by non-

observance of the installation requirements specified herein.

5. OPERATING THE REFRIGERATOR

5.1. BEFORE TURNING ON

After installing the refrigerator please wait for approx. three hours before

connecting it to power supply. This way you will allow the refrigerant to be

properly distributed: this is necessary for proper operation of the refrigerator.

You will be able to place food in the refrigerator within a few hours after

connecting it to power supply. Remove the transportation inserts between the

compressor and the back wall of the niche, as well as all other inserts and

adhesive tape preventing the movable parts of the appliance from displacement

during transportation.

If the appliance is covered in a protective polymer film, carefully remove it, taking

precautions not to damage the paint or polymer coatings in the components.

5.2. STARTING OPERATION

– When the refrigerator is connected to power supply the display backlight will

light for two seconds.

– The compressor will start up.

– The SMART function will be activated and the corresponding indicator will light

for a few seconds.

– When the display backlight goes out open the door or press any button; the

backlight will come on again.

– Open the refrigerator door in 30 minutes. The temperature inside the cooling

chamber should have dropped. This means that the refrigeration system is

operating properly.

– Indicator is the pilot light of the frequency converter. If the power is on it

will light when the compressor is operating.

– Any operations with buttons are only accessible when the buttons are

unlocked and backlit on the display.

– You can select the operating mode of the refrigerator on the control panel

located on the refrigerator door.

ATTENTION!

A temperature of +2 °С is comparatively low, while +8 °С is relatively high for a

cooling chamber. Usually the temperature is set to +4 °С.

6. FUNCTIONAL FEATURES

TEMPERATURE SETTINGS

– Setting the temperature in the cooling chamber:

to set the temperature press the «Zone» button to select the zone of the

cooling chamber and hold it down until the indicator starts flashing. Then

press the «Temperature» button to set the desired temperature. Each

subsequent pressing of the button will change the temperature on the display.

After selecting the temperature press the

ОК /

button or wait for 5 second

for setting confirmation. The temperature is now set.

Order of temperature selection with the button:

5 °С

6 °С 7 °С 8 °С OFF 2 °С 3 °С 4 °С 5 °С.

ATTENTION!

The OFF indicator means that the refrigerator is shut down. No cooling is active in

the OFF state. By all means remove all food from the refrigerator before selecting

this setting.

– Setting the temperature in the freezing chamber:

to set the temperature press the «Zone» button to select the zone of the

freezing chamber and hold it down until the indicator starts flashing.

Then press the «Temperature» button to set the desired temperature. Each

subsequent pressing of the button will change the temperature on the display.

After selecting the temperature press the

ОК /

button or wait for 5 second

for setting confirmation. The temperature is now set.

Order of temperature selection with the button:

-18 °С

-17 °С -16 °С -24 °С -23 °С -22 °С -21 °С -20 °С

-19 °С -18 °С.

«FAST COOLING» MODE

After selecting the «Fast Cooling» mode the temperature in the cooling chamber

will quickly drop to 2 °С. This allows food to be stored fresh without a loss of

nutrients.

ATTENTION!

In the «Fast Cooling» mode the temperature in the cooling chamber is not

adjustable.

– To activate the function press the «Functions» button on the control panel; the

indicator will start flashing on the display. To confirm the selection press

and hold the

ОК /

button for 5 seconds.

– In the fast cooling mode press and hold the «Functions» button until the

indicator starts flashing on the display. Press the

ОК /

button to deactivate

the function.

NOTE: the fast cooling function is automatically deactivated when the «Vacation»

or SMART function is selected.

«KEEP FRESH» FUNCTION

When the refrigerator is on the «Keep Fresh» function will regularly start up and

operate for 20 minutes.

The freshness retention system decomposes smells and microorganisms based

on CO

and H

O. At the same time it releases free radicals for active destruction

of germs, creating a cleaner and safer cooling environment.

– Manual activation of the function:

press the «Functions» button to select the «Keep Fresh» function, until the

indicator starts flashing on the display; then press and hold the

ОК /

button for 5 seconds to confirm the selection. If the

ОК /

button is not

pressed within 5 seconds the setting will be cancelled.

– De-activation of the function:

the function will be automatically deactivated after 20 minutes of operation.

– Manual de-activation of the function:

press the «Functions» button to select the «Keep Fresh» function, until the

indicator starts flashing on the display; then press and hold the

ОК /

button

to confirm de-activation.

FAST FREEZING FUNCTION

This function provides fast freezing of food.

When the fast freezing function is activated the temperature in the freezing

chamber will be automatically set to -32 °С. After 26 hours of operation the fast

freezing function will be automatically deactivated.

ATTENTION!

In the fast freezing mode the temperature in the freezing chamber is not

adjustable.

– Activation of the function:

press the «Functions» button to select the «Fast Freezing» function, until the

indicator starts freezing on the display; then press and hold the

ОК /

button for 5 seconds to confirm the setting. If the

ОК /

button is not pressed

within 5 seconds the setting will be cancelled.

– De-activation of the function:

after 26 hours of operation the function will be automatically deactivated.

If you wish to prematurely deactivate the fast freezing function, press the

«Functions» button until the

indicator starts flashing on the display;

then press the

ОК /

button to confirm, this will deactivate the fast freezing

function.

NOTE: when the SMART function is activated the fast freezing function will be

automatically cancelled.

Centek CT-1749 Inox Инструкция по эксплуатации онлайн [22/28] 810062

Содержание

Похожие устройства