Kuppersberg WM 581 W [74/124] Automatic fault warnings and what to do

Kuppersberg WM 581 W [74/124] Automatic fault warnings and what to do
TECHNICAL PASSPORT ENGLISH
washing machine
74
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
E01
The door of your machine is
not shut properly.
Shut the door properly until you hear
a click. If your machine persists to indicate
fault, turn off your machine, unplug it and
contact the nearest authorised service agent
immediately.
E02
The water pressure or
the water level inside the
machine may be low.
Check the tap is fully turned on. Mains water
may be cut-off. If the problem still continues,
your machine will stop after a while
automatically. Unplug the machine, turn off
your tap and contact the nearest authorised
service agent.
E03
The pump is faulty or pump
lter is clogged or electrical
connection of the pump is
faulty.
Clean the pump lter. If the problem
persists, contact the nearest authorised
service agent. (*)
E04
Your machine has excessive
amount of water.
Your machine will discharge water by itself.
Once the water has drained, turn off your
machine and unplug it. Turn off the tap and
contact the nearest authorised service agent.
10. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system,
indicated by a combination of ashing wash operation lights. The most common
failure codes are shown below.
(*) See the chapter regarding maintenance and cleaning of your machine.
Washing machines
Discoloration of product materials during operation
Residual small amount of water in the folds of the door seal gasket after washing
Slight vibration and shaking of the machine when working at high spin speeds
High-frequency noise of the drive belt when the product is in spin mode
Minor technical smells coming from a new product during the initial operation period
Please note!
The following shall not be considered as defects of the Product:

Содержание

Похожие устройства

Скачать