Kuppersberg INLINEA 72 Inox Инструкция по эксплуатации онлайн [16/44] 810155

Kuppersberg INLINEA 72 Inox Инструкция по эксплуатации онлайн [16/44] 810155
16
TECHNICAL PASSPORT ENGLISH
Extractor hood
assembly and installation of the ap-
pliance is completed.
8.
Do not use the appliance with-
out the aluminum lter in place.
9.
Do not touch the lamps.
10. Do not remove the aluminum
lter while the appliance is in opera-
tion.
11.
Do not disconnect the appli-
ance from the power supply system
dire
ctly. If necessary, turn the appli-
ance off using the control panel and,
only
after that, unplug it from the
power supply system. When switch-
ing on: rst connect the appliance
t
o the power supply system, then
switch it on using the control panel,
but not vice versa!
12. The appliance requires regu-
lar cleaning and maintenance work.
13.
When installing the appli-
ance, observe the required distance
betw
een it and the cooking surface
of your stove:
- for an electric stove: at least 65
cm
- for a gas or gas-electric stove: at
least 75 cm (pic.1)
14. Do not allow children to play
with packaging materials, it can be
dangerous!
15. The appliance is allowed to be
turned on only once the pots and/or
pans are placed on the stove.
16. For best air cleaning in your
kitchen, do not turn off the appliance
immediately after the cooking pro-
cess is completed: let the appliance
run f
or a further 15 minutes. For this
purpose you can also use the timer
function (the button «Auto Switch
Off Timer» on the control panel).
17. Ensure adequate ventilation in
the kitchen, if a gas stove is operated
simultaneously with the appliance.
18. In case of any malfunctions,
contact your nearest authorized ser
-
vice center.
19.
If the kitchen hood is sup-
posed to operate in air discharge
mode,
then during installation it is
important to provide a duct of the
corresponding diameter. To prevent
loss of performance caused by aero
-
dynamic resistance of the duct, the
air duct must not be t
oo long, or
curved. Never restrict the duct size,
or make sharp bends. In addition, it
is preferable to use smooth PVC duct
(round or at), rather than the exi
-
ble corrugated one because bends of
a c
orrugated duct increase the noise
level of the hood.
20. The manufacturer does not
bear any responsibility for any pos
-
sible damage, in case of non-compli-
ance with above precautions.

Содержание

Похожие устройства

Скачать