Home
Главная
Rondell
Электрочайник
RDE-1007
Инструкция по эксплуатации Страница: 11

Rondell RDE-1007 Инструкция по эксплуатации онлайн [11/24] 810675

will be showing the temperature of water inside the kettle

for 5 minutes.

Water heating and temperature retention modes

–

The kettle allows for heating up water up to 50, 70, and

80 °C with subsequent 2-hour temperature retention. Touch

the button (7) to select the desired temperature. Each

instance of touching the button (7) will be followed by a

sound signal. The indication panel (10) will cycle trough tem-

perature modes as «M1 50 °С», «M2 70 °С», «M3 80 °С»,

«BOIL». The «WARM» indicator will flash synchronously with

each of these settings (except for the «BOIL» mode).

–

To heat water up to 50 °C select the «M1 50 °C» setting, up

to 70 °C - the «M2 70 °C» setting, up to 80 °C - «M3 80 °C»

set. Select the «BOIL» mode to boil water. Touch the

button (11) to begin the heating of water. The display (6) will

show the water temperature. The indication panel (10) will

display the corresponding temperature setting.

–

Once the water has heated up to the set temperature, you

will hear a sound signal and the heating process will stop.

The display (6) will show the water temperature. The tem-

perature mode indicator on the indication panel (10) will

turn on. The «WARM» indicator will be on continuously. The

kettle will go into temperature retention mode.

– Should you want to change the retained temperature,

touch the

button (7) again and select a new tem-

perature mode. Then touch the power button (11)

to enable it.

Notes: If the water temperature inside the kettle is above the

set value, the WARM indicator will flash until the desired tem-

perature is reached. Then the temperature retention mode

will be activated.

–

Touch the button (11) to disable the temperature reten-

tion mode. The indication panel (10) will switch off. The dis-

play (6) will be showing the temperature of water inside the

kettle for 5 minutes. Then the display (6) will switch off. The

kettle will switch to standby mode:

Notes: The kettle does not have a memory function. Once

the kettle is removed from the base (8). The temperature set-

tings will be automatically reset. When the kettle is reinstalled

on the base (8), the kettle will go into standby mode. After

5 minutes the temperature setting will no longer be shown on

the display (6).

–

If you accidentally switch the kettle on, but the water level

appears to be below the minimal mark, the automatic ther-

mal switch will be activated and the kettle will be switched

off automatically. In this event take the kettle from the base

(8), let it cool down for 10-15 minutes, then fill it with water

and switch it on - the kettle will operate normally.

Notes: There is a cord storage (9) on the reverse side of the

base (8). You can adjust the optimal power cord length by

appropriately folding it in the cord storage.

Troubleshooting

Problem Possible reason Solution

The unit does not switch

The unit is not connected to the mains Check if the socket is operational by plugging anoth-

er device into it

plug the power cord into the mains

Check the main circuit breaker for the electrical

supply in the room

The unit is malfunctioning Contact the customer service

The unit has not sufficiently cooled

down after use without water or with

insufficient amount of water

Let the unit cool down for 15 minutes

The LED display is show-

ing unintelligible symbols

Software malfunction. Alternatively,

control circuit malfunction

Switch the kettle off, then switch it on again If this

doesn’t help, contact the customer service

The unit switches off

before the water boils

Significant calcium buildup inside

the tank

Remove the limescale from the kettle in accordance

with instructions in the scales removal section

Mains socket overload by other de-

vices

Check the power cord connection.

Unplug any other devices from the socket

The unit will not switch off The lid of the unit is open Close and secure the lid

Rondell RDE-1007 Инструкция по эксплуатации онлайн [11/24] 810675

Похожие устройства