Home
Главная
Rondell
Кофемашина
RDE-1112
Инструкция по эксплуатации Страница: 26

Rondell RDE-1112 Инструкция по эксплуатации онлайн [26/52] 810684

– Add clean room temperature water to the water tank.

Do not exceed the MAX mark. It is recommended to

fill the water tank by 3/4 to the MAX mark.

– Install the water tank in the coffee machine and

press its lower left edge until it is completely fixed

(Fig. 2).

Notes: The tank (4) can be filled only with clean water

at room temperature. Do not pour hot or ice water, as

well as mineral water and milk into the tank. Failure to

comply with this requirement will lead to cracks in the

container or damage to the device. When installing and

removing the water tank, always hold it by the recess at

the bottom of the tank. It is forbidden to hold the tank

by its upper part. This may cause its damage, fall and

spill of the liquid.

– Open the lid of the bean container (8).

– Before the first use, add 30 to 200 g of coffee beans

to the bean container (10) (Fig. 3).

Notes: Only coffee beans can be placed in the con-

tainer (10), please do not add water, ground coffee,

sugar, spices, coffee beans mixed with solid particles

to it. This can lead to the failure of the knives and the

coffee grinder mechanism itself.

UNIT OPERATION

Switching the coffee machine on/off

Connect the plug of the power cord of the device to the

mains (Fig. 4).

Press the On button (16) on the control panel (7).

When switched on, the coffee machine runs a self-diag-

nosis and automatic washing.

Note:

– To prevent the removable tray (1) from overflowing

with dirty water during rinsing, place a cup or other

suitable container under the coffee supply unit (2)

(Fig. 5).

– To prevent droplets from splashing, always adjust

the height of the coffee supply unit (2) to the height

of the cup.

– The automatic flushing mode starts when you turn

it on for the first time, as well as when the machine

is activated from standby mode. After the washing

process is completed, dirty water can be poured out

of the container.

The process of preparing the machine for operation is

reflected on the display (18) (Fig. 6-7).

When the preparatory processes are completed, the

device will enter standby mode. A message will appear

on the display (18) (Fig. 8).

To turn off the coffee machine and put it into standby

mode, press and hold the button (16) for 2 seconds.

The flushing process will start. Information will be

shown on the display (Fig. 9). Then the coffee machine

will return to the «Off» mode.

MAKING DRINKS

– Place a cup under the adjustable coffee spout (2)

of the coffee machine and adjust its height (fig. 5).

– Before the first use, set the grinding degree control

knob (14) of coffee beans to the middle position.

– To prepare a drink, press one of the buttons on the con-

trol panel according to your choice of «Espresso» (26),

«Americano» (25), «Cappuccino» (19), «Latte» (20),

«Hot water» (24) (Fig. 10).

– The preparation process will end automatically when

the coffee machine has made the programmed

amount of drink.

– To get a double portion of the drink, press the

«Double portion» button (23) until the coffee prepa-

ration process is completed. The corresponding pic-

ture «x2» will appear on the display (Fig. 11).

– To interrupt the process of making the drink at any

stage, press the «On/Off/Exit» button (16).

– When the coffee making process is finished, take the

cup with the drink away.

Preparation of a drink from ground coffee

To prepare a drink from ground coffee, press the button

(28) «Ground coffee/Input» on the control panel in the

standby mode.

• An animated load image will be shown on the dis-

play (Fig. 12).

• Open the lid of the grain container (8) and remove

the protective cover of the funnel for loading ground

coffee (9).

• Using a measuring spoon from the delivery set, pour

one portion of ground coffee into the loading chan-

nel (Fig. 13).

Rondell RDE-1112 Инструкция по эксплуатации онлайн [26/52] 810684

Похожие устройства