Zyxel GS2200-24 Руководство пользователя онлайн [27/332] 810932

GS2200-8/24 User’s Guide 27

CHAPTER 2

Hardware Installation and Connection

2.1 Installation Scenarios

This chapter shows you how to install and connect the Switch.

The Switch can be placed on a desktop or rack-mounted on a standard EIA rack. Use the rubber

feet in a desktop installation and the brackets in a rack-mounted installation.

Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front and

3.4 inches (8 cm) at the back of the Switch. This is especially important for

enclosed rack installations.

2.2 Desktop Installation Procedure

1 Make sure the Switch is clean and dry.

2 Set the Switch on a smooth, level surface strong enough to support the weight of the Switch and

the connected cables. Make sure there is a power outlet nearby.

3 Make sure there is enough clearance around the Switch to allow air circulation and the attachment

of cables and the power cord.

2.3 Mounting the Switch on a Rack

The Switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other

equipment. Follow the steps below to mount your Switch on a standard EIA rack using a rack-

mounting kit.

2.3.1 Rack-mounted Installation Requirements

• Two mounting brackets.

• Eight M3 flat head screws and a #2 Philips screwdriver.

• Four M5 flat head screws and a #2 Philips screwdriver.

Failure to use the proper screws may damage the unit.

2.3.1.1 Precautions

• Make sure the rack will safely support the combined weight of all the equipment it contains.