Home
Главная
Brayer
Электрочайник
BR1079
Инструкция по эксплуатации Страница: 7

Brayer BR1079 Инструкция по эксплуатации онлайн [7/44] 811595

• Do not repair the unit by yourself. Do not disassemble

the unit by yourself, if any malfunction is detected, and

after it was dropped, unplug the unit and apply to the

service center.

• Transport the kettle in the original package.

• Keep the unit out of reach of children and disabled

persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE USING THE KETTLE

After unit transportation or storage at low

temperature, it is necessary to keep it for at least

three hours at room temperature.

• Unpack the kettle and remove all packing materials and

advertising stickers.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the kettle for damages, in case of damage do

not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the lower panel of the unit or

the base correspond to the specications of your

mains. When using the kettle in the mains with 60

Hz frequency, the unit does not need any additional

settings.

• Wipe the outer and inner surface of the ask (1) with a

slightly damp cloth then wipe dry. Do not use abrasives

and coarse scourers for this purpose.

• Place the base (7) on a solid steady at and non-slip

non-metal surface away from heat sources as far as

possible from the edge of the surface.

• Do not place and do not use the kettle in closed space,

for example, in the cupboard or in closed structures —

this can lead to its breakage, cause harm to the user or

damage to his/her property.

• Before connecting the kettle, make sure that there are no

moisture drops on the base (8), the ask (2), the power

cord and the power plug.

• Note: on the inner part of the base (8) there is a power

cord storage (9). Select the optimal length of the power

cord laying it in a corresponding way.

• Take the handle (5) and remove the lid (4) upwards.

• Fill the kettle with water up to the «MAX» mark,

according to the scale located on the inner surface of the

ask (2) (pic. 1).

• Close the lid (4) and make sure that the lid (4) is tightly

closed.

• Place the kettle on the base (8).

• Insert the power cord plug into the mains socket, you

will hear a sound signal and the digital symbols (11) will

display the water temperature in the kettle ask (2).

• Press the on/o󰀨 button (14) «

» (pic. 2), you will hear

a sound signal, the illumination (1) will light up red,

the digital symbols (11) will display the water heating

Brayer BR1079 Инструкция по эксплуатации онлайн [7/44] 811595

Похожие устройства