Home
Главная
Brayer
Электрочайник
BR1079
Инструкция по эксплуатации Страница: 8

Brayer BR1079 Инструкция по эксплуатации онлайн [8/44] 811595

temperature, you will hear a sound signal when the

water temperature reaches 100°C, the heating element

of the kettle will be switched o󰀨.

• Remove the kettle from the base (8) and carefully pour

out boiled water into a suitable bowl (piс. 3).

• Remember that there is boiling water inside the kettle

ask (2), always hold the kettle only by the handle (6),

do not tilt the kettle sharply, in case of careless use of

the kettle you can get burns by hot water.

• Repeat the water boiling procedure several times.

ATTENTION! To avoid burns by hot steam, do not bend

over the spout (3).

• Hot water resulting from the rst boilings is not

recommended to consume, you may use it for domestic

needs.

USING THE ELECTRIC KETTLE

• Place the kettle (8) on a solid steady at and non-slip

non-metal surface away from heat sources as far as

possible from the edge of the surface.

WATER BOILING

• • Take the handle (5) and remove the lid (4) upwards.

• Fill the kettle with water not lower than the «MIN» mark

and not higher than the «MAX» mark on the scale

located on the inner surface of the ask (2) (pic. 1).

• Close the lid (4) and place the kettle lled with water on

the kettle stand (8).

Note: always make sure that water drops do not fall on

the contact unit of the kettle stand (8).

• Insert the power cord plug into the mains socket, you

will hear a sound signal and the digital symbols (11) will

display the water temperature in the kettle ask (2).

• Press the on/o󰀨 button (14) «

» (pic. 2), you will hear

a sound signal, the illumination (1) will light up red,

the digital symbols (11) will display the water heating

temperature, you will hear a sound signal when the water

temperature reaches 100°C, the heating element of the

kettle will be switched o󰀨.

• If it is necessary to switch the kettle o󰀨 during boiling of

water, press the on/o󰀨 button (14) «

».

• If it is necessary to switch the kettle o󰀨, press the On/O󰀨

button (14) «

».

Notes:

- after water boiling, droplets may appear on the

surface of the stand (8) due to steam condensation.

This is a normal phenomenon and is not a warranty

case;

- if no actions are performed within 1 minute, the kettle

will pass into standby mode.

HEATING THE WATER UP TO PRESET

TEMPERATURE

• You can warm up water up to the required temperature

(40-70-80-90-100°C). For making di󰀨erent tea varieties

the special water temperature is required.

• Recommended water temperature: 40°C – for baby food

and other needs, 70°C – white and green tea, 80°C –

instant co󰀨ee, 90-100°C – black tea.

Brayer BR1079 Инструкция по эксплуатации онлайн [8/44] 811595

Похожие устройства