Home
Главная
Brayer
Электрочайник
BR1068
Инструкция по эксплуатации Страница: 6

Brayer BR1068 Инструкция по эксплуатации онлайн [6/40] 811613

6 EN

by the manufacturer, a maintenance service or similar

qualied personnel to avoid danger.

• Do not repair the unit by yourself. Do not disassemble

the unit by yourself, if any malfunction is detected, and

after it was dropped, unplug the unit and apply to the

service center.

• Transport the kettle in the original package.

• Keep the unit out of reach of children and disabled

persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE USING THE KETTLE

After unit transportation or storage at low temperature,

it is necessary to keep it for at least three hours at

room temperature.

• Unpack the kettle and remove all packing materials and

advertising stickers.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the kettle for damages, in case of damage do

not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the lower panel of the unit or the

base correspond to the specications of your mains.

When using the kettle in the mains with 60 Hz frequency,

the unit does not need any additional settings.

• Wipe the outer and inner surface of the ask (1) with a

slightly damp cloth then wipe dry. Do not use abrasives

and coarse scourers for this purpose.

• Place the base (9) on a solid steady at and non-slip non-

metal surface away from heat sources as far as possible

from the edge of the surface.

• Do not place and do not use the kettle in closed space,

for example, in the cupboard or in closed structures —

this can lead to its breakage, cause harm to the user or

damage to his/her property.

• Wipe the outer surface of the ask (2) with a slightly

damp cloth and then wipe it dry. Do not use abrasives and

coarse scourers for this.

• Before connecting the kettle, make sure that there are no

moisture drops on the base (9), the ask (2), the power

cord and the power plug.

• Press the button (5), the lid (4) will open.

• Fill the kettle with water up to the «MAX» mark, according

to the scale (8) situated on the outer surface of the ask (2).

• Close the lid (4) and make sure that the lid (4) is tightly

closed.

Note: it is recommended to install the tea infuser (7) in the lid

(9) during the rst boiling of water.

• Place the kettle on the base (4).

• Insert the power cord plug into the mains socket, you will

hear a sound signal.

Brayer BR1068 Инструкция по эксплуатации онлайн [6/40] 811613

Похожие устройства