Home
Главная
Brayer
Электрочайник
BR1068
Инструкция по эксплуатации Страница: 7

Brayer BR1068 Инструкция по эксплуатации онлайн [7/40] 811613

7EN

STANDBY MODE

• Plug the power cord into an electrical outlet, then 2 beeps

will sound and the temperature of the water in the ask

(1) of the kettle will be displayed in digital symbols (13).

• Press the water boiling/kettle switch o󰀨 button (11) « », the

water boiling mode indicator (12) will light up, the digital

symbols (13) will show the water heating temperature.

When the water temperature reaches 100°C, the heating

element of the kettle will switch o󰀨.

Notes: operating mode control buttons are sensory, just

touch a button.

• During the kettle operation the illumination (1) lights

up. As the water temperature in the ask (2) rises, the

illumination (1) color changes.

• Press the button (5), the lid (4) will open.

• Remove the kettle from the base (9) and carefully pour

out boiled water into a suitable bowl.

• Remember that there is boiling water inside the kettle

ask (2), always hold the kettle only by the handle (7),

do not tilt the kettle sharply, in case of careless use of the

kettle you can get burns by hot water.

• Repeat the water boiling procedure several times.

ATTENTION! To avoid burns by hot steam, do not bend

over the spout (3).

• Hot water resulting from the rst boilings is not recommended

to consume, you may use it for domestic needs.

USING THE ELECTRIC KETTLE

• Place the kettle on a solid steady at and non-slip non-

metal surface away from heat sources as far as possible

from the edge of the surface.

WATER BOILING

• Press the button (5), the lid (4) will open.

• Fill the kettle with water not below the mark «MIN» and

not above the maximal mark «MAX» on the scale (8) on

the outer surface of the ask (2).

• Close the lid (4) and place the kettle lled with water on

the kettle stand (9).

Note: always make sure that water drops do not fall on the

contact unit of the kettle stand (9).

• Plug the power cord into an electrical outlet.

• Press the water boiling/kettle switch o󰀨 button (11) « »,

the water boiling mode indicator (12) will light up, the digital

symbols (13) will show the water heating temperature.

When the water temperature reaches 100°C, the heating

element of the kettle will switch o󰀨.

• During the kettle operation the illumination (1) lights

up. As the water temperature in the ask (2) rises, the

illumination (1) color changes.

• If you need to switch the kettle o󰀨 during boiling, press the

water boiling/kettle switch o󰀨 button (11) «

».

Notes:

- after water boiling, droplets may appear on the surface

Brayer BR1068 Инструкция по эксплуатации онлайн [7/40] 811613

Похожие устройства