Home
Главная
Brayer
Кофеварка
BR1115
Инструкция по эксплуатации Страница: 15

Brayer BR1115 Инструкция по эксплуатации онлайн [15/80] 811624

• After making the necessary amount of frothed milk stop

the process by pressing the «Cappuccino»-button (8)

again.

• Remove the cup with frothed milk and use the frothed

milk for the intended purpose.

• After you nish using the co󰀨ee maker, switch the

co󰀨ee maker o󰀨 by setting the switch (11) «0/I» to the

position «0».

• If there is some milk left in the cappuccinator, remove it

and put the cappuccinator into the fridge (pic. 12), if you

used all milk during making co󰀨ee, it is recommended

to remove the cappuccinator and clean it (see the

chapter «CAPPUCCINATOR CLEANING»).

CAPPUCCINATOR CLEANING

• We recommend cleaning the cappuccinator after the

milk container (18) is empty.

• Take the container (18) and remove it (pic. 1), remove

the cappuccinator lid (16) from the container (18).

• Wash the container (18) with a neutral detergent,

remove the milk intake pipe from the cappuccinator lid

(16) and wash it, rinse all the parts, dry them and install

the milk intake pipe back to its place.

• Turn the steam nozzle counterclockwise and remove

it from the cappuccinator (16) body (pic. 11), wash the

nozzle.

• Remove the cappuccinator pipe (15) by turning the

pipe (15) counterclockwise, rinse the pipe (15), install it

back to its place, x the pipe (15) by turning it clockwise

(g. 9).

• Grasp the left side and raise the silicone plug (pic. 14),

rinse the cappuccinator lid (16) under a warm water jet,

close the silicone plug.

• Install the steam nozzle back to its place and turn it

clockwise (pic. 15).

• Prepare the co󰀨ee maker as described in the chapters

above, but do not add ground co󰀨ee into the lter (21 or

22).

• Place a cup of suitable height and capacity on the grid

(2).

• Fill the container (18) with water, do not exceed the

maximal level mark.

• Install the cappuccinator lid (16) on the container (18)

and install the cappuccinator back to its place until the

lock clicking.

• Direct the cappuccinator pipe (15) into the cup using

the cappuccinator pipe angle adjustment bar (14), if

necessary, change the length of the cappuccinator pipe

(15) (g. 9).

• Turn the frothed milk supply (intensity) control knob (175)

to the right to the position «

».

• Switch the co󰀨ee maker on by setting the power switch

(11) «0/I» to the position «I», the indicator (7, 8, 9) will

light up and start ashing.

• When the co󰀨ee maker is ready for operation, the light

indicator (7, 8, 9) will glow constantly.

• Press and hold the «Latte»-button (9) for 3 seconds, the

indicators «

» and « » will light up.

Brayer BR1115 Инструкция по эксплуатации онлайн [15/80] 811624

Похожие устройства