Home
Главная
Brayer
Кофеварка
BR1115
Инструкция по эксплуатации Страница: 16

Brayer BR1115 Инструкция по эксплуатации онлайн [16/80] 811624

• After you nish using the co󰀨ee maker, switch the

co󰀨ee maker o󰀨 by setting the switch (11) «0/I» to the

position «0».

• Wait until the co󰀨ee maker cools down, take the

container (18), pull it towards yourself and remove it

(pic. 1), remove the cappuccinator lid (14) from the

container (18).

• Pour the remaining water out of the container (18), wipe

the container with a dry cloth and dry the cappuccinator

lid (16).

• Before assembling make sure that the cappuccinator lid

and the container are dry. Install the cappuccinator lid

(16) on the container (18) and install the cappuccinator

on the co󰀨ee maker.

DESCALING

• Scale inside the boiler a󰀨ects the taste of ready co󰀨ee,

slows down the co󰀨ee making and reduces the service

life of the co󰀨ee maker.

• Note that the thicker the scale, the more di󰀩cult it is to

remove, that’s why we recommen regularly removing

scale for e󰀨ective operation of the co󰀨ee maker (see

the table).

Water type Cleaning frequency

Soft (ltered) water Every 80 co󰀨ee making cycles

Hard (tap) water Every 40 co󰀨ee making cycles

• The buttons (7, 6, 9) light indicators ashing by rotation

will remind you about descaling.

• You can use special descaling agents for espresso co󰀨ee

makers or co󰀨ee machines to remove scale. You can also

use table vinegar or citric acid solution (2 teaspoons of

citric acid per 1 liter of water).

• Follow the instructions on the usage of the descaling

agent, pour it into the water tank (13).

• Install one of the co󰀨ee lters (21 or 22) into the lter

holder (20) matching the ledge on the lter (21 or 22) with

the hole on the holder (20) and turn the lter (21 or 22)

counter/clockwise.

• Place a cup of suitable height and capacity on the grid (2).

• Direct the cappuccinator pipe (15) into the cup using

the cappuccinator pipe angle adjustment bar (14), if

necessary, change the length of the cappuccinator pipe

(15) (g. 9).

• Insert the power plug into the mains socket.

• Switch the co󰀨ee maker on by setting the «0/I» power

switch (11) to the «I» position.

• To switch the cleaning mode on, press simultaneously the

button (9) «Latte» and the button (7) «Espresso».

• In the descaling mode the light indicators slowly ash

by rotation, after 30 minutes the light indicators will start

ashing faster. Remove the container (13), drain the

remaining descaling solution and ll the container (13) with

clean water. Install the container (13) back to its place.

• Pour the descaling solution out from the cup, place the

cup on the grid (2).

Brayer BR1115 Инструкция по эксплуатации онлайн [16/80] 811624

Похожие устройства