Home
Главная
Brayer
Кофеварка
BR1117
Инструкция по эксплуатации Страница: 10

Brayer BR1117 Инструкция по эксплуатации онлайн [10/68] 811626

• For easy removing of the co󰀨ee remnants use the

retainer on the handle (4) to prevent the lter (6) from

falling o󰀨 the holder (5).

Notes:

- the cups should be preliminary heated up, when

water heats up in the boiler, put the cups on the

tray (8).

- if you need to promptly remove the lter holder

(5), you have to reduce the pressure in the boiler,

switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (15) «

», place a suitable cup under the tip

(11) and slightly open the steam supply by turning

the knob (9) «

» counterclockwise. After the

pressure in the boiler is released, you can remove

the lter holder (5).

ESPRESSO PORTION SETTING

One cup of co󰀨ee portion setting

• Espresso portion setting is best done using water

and without adding ground co󰀨ee into the lter (6).

• Open the lid (13) and ll the container (14) with

water, or remove the container (14) and ll it with

water, place the container (14) back to its place.

• Insert one of the co󰀨ee lters (6) into the holder (5).

• Install the lter holder (5) into the co󰀨ee maker. The

holder (5) ledges should match the groves on the

boiler «

», after that turn the lter holder handle (4)

to the right until bumping « » (pic. 1).

• Place a suitable cup on the grid (2).

• Insert the power plug into the mains socket.

• Press the on/o󰀨 button (15) «

» to switch the co󰀨ee

maker on, the button (15) illumination will light up and

ash, when the button (15) illumination will stop ashing

and glow constantly, this means preheating is completed.

• Press and hold the water supply button for one cup (16) «

» for 3 seconds to enter the setting mode, the button

(16) indicator will ash, the pump will be switched on and

water will ow into the cup.

• When the required amount of water is poured into the

cup, release the button (16) « », the button (16) «

» illumination will ash twice, indicating the successful

setting of the required amount of co󰀨ee, which will be

prepared in the future use of the co󰀨ee maker.

Notes:

- you can set the amount of ready co󰀨ee for one cup

from 20 to 60 ml;

- if the set amount of co󰀨ee is less than 20 ml, the

button (16) «

» illumination will immediately go out,

indicating that the setting is failed, and the amount of

ready co󰀨ee will be set according to the last setting;

- if the set amount of co󰀨ee is 60 ml, the water pump

will be switched o󰀨 automatically, the button (16) «

» illumination will ash twice, indicating that the

maximum amount of 60 ml of co󰀨ee is successfully

set.

Two cups of co󰀨ee portion setting

- Two cups of co󰀨ee portion setting is similar to setting

one cup of co󰀨ee portion.

Brayer BR1117 Инструкция по эксплуатации онлайн [10/68] 811626

Похожие устройства