Home
Главная
Brayer
Кофеварка
BR1117
Инструкция по эксплуатации Страница: 11

Brayer BR1117 Инструкция по эксплуатации онлайн [11/68] 811626

• Simultaneously press and hold the buttons (16) « »

and (17) «

» for 5 seconds, the illumination of all four

buttons on the control panel (7) will ash twice, after that

the co󰀨ee maker will be switched back to the factory

settings.

MAKING CAPPUCCINO

ATTENTION! Be careful to avoid burns by the released

hot steam.

• Make co󰀨ee, as described in the chapter «MAKING

ESPRESSO», in a cup with enough capacity to add

frothed milk.

• Make sure that the steam control knob (9) «

» is in the

position «the steam supply is o󰀨 «0».

• Press the steam supply button (18) «

», the button (18)

lighting will ash. Wait until the button (18) «

» lighting

will stop ashing and start glowing constantly. Place any

suitable bowl under the tip (11) for water. Carefully turn

the steam supply knob (9) «

» counterclockwise for a

quarter of a turn to remove the condensed uid from the

cappuccinator pipe (10).

• After removing the condensed uid close the steam

supply by turning the knob (9) «

» clockwise until

bumping «0».

Note: some water or steam may appear from the lter

holder (5), it is normal.

• Put the cappuccinator pipe tip (11) into a glass with cold

milk or cream, the amount of milk or cream should be

- Press and hold the water supply button for two cups

(17) «

» for 3 seconds to enter the setting mode,

the button (17) indicator will ash, the pump will be

switched on and water will ow into the cup.

- When the required amount of water is poured into

the cup, release the button (17) «

», the button

(17) «

» illumination will ash twice, indicating the

successful setting of the required amount of co󰀨ee,

which will be prepared in the future use of the co󰀨ee

maker.

Notes:

- you can set the amount of ready co󰀨ee for two cups

from 40 to 100 ml;

- if the set amount of co󰀨ee is less than 40 ml, the

button (17) «

» illumination will immediately go out,

indicating that the setting is failed, and the amount of

ready co󰀨ee will be set according to the last setting;

- if the set amount of co󰀨ee is 100 ml, the water pump

will be switched o󰀨 automatically, the button (17) «

» illumination will ash twice, indicating that the

maximum amount of 100 ml of co󰀨ee is successfully

set.

RETURN TO THE FACTORY SETTINGS

• Make sure that the steam supply is closed, to do this

turn the handle (9) «

» clockwise until bumping «0».

• Switch the co󰀨ee maker on and wait for preheating, the

button (15) « » indicator will glow constantly.

Brayer BR1117 Инструкция по эксплуатации онлайн [11/68] 811626

Похожие устройства