Home
Главная
Brayer
Кофеварка
BR1117
Инструкция по эксплуатации Страница: 7

Brayer BR1117 Инструкция по эксплуатации онлайн [7/68] 811626

• Transport the co󰀨ee maker in the original package.

• Keep the unit out of reach of children and disabled

• persons.

COFFEE MAKER IS INTENDED FOR HOUSEHOLD

USE ONLY, DO NOT USE THE COFFEE MAKER FOR

COMMERCIAL OR LABORATORY PURPOSES.

BEFORE USING THE COFFEE MAKER

After unit transportation or storage at low

temperature, it is necessary to keep it for at least

three hours at room temperature.

• Unpack the co󰀨ee maker and remove all the

packaging materials.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the co󰀨ee maker for damages, in case of

damage do not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the lower panel of the unit

correspond to the specications of your mains. When

the unit is used in the mains with 60 Hz frequency, it

does not need any additional settings.

• Wipe the co󰀨ee maker body (12) surface with a

clean, slightly damp cloth to remove dust, wipe the

co󰀨ee maker body (12) dry.

• Make sure that the steam supply is closed. To do this

turn the knob (9) «

» clockwise until bumping «0».

CAUTION! After removing the water tank (14) remove

the transportation plug from the water outlet (g. 5).

• Before using the espresso machine for the rst time,

wash all removable parts (1, 2, 5, 6, 14, 19, 20) with

warm water and neutral detergent, rinse and dry

them.

• Remove the water tank (14), ll it with cold water up

to the MAX mark and install it back to its place.

Notes: to ll the water tank (14) with water you can

open the lid (13) and pour water into the tank (14).

• Insert any co󰀨ee lter (6) into the holder (5) (do not

add ground co󰀨ee into the lter).

• Install the lter holder (5) into the co󰀨ee maker. The

holder (5) ledges should match the grooves on the

boiler «

», after that turn the lter holder handle (4)

to the right until bumping « » (pic. 1).

• Place a suitable cup on the grid (2).

• Insert the power plug into the mains socket.

• Switch the co󰀨ee maker on by pressing the on/o󰀨

button (15) « », the button (15) lighting will light

up and start ashing, when the button (15) lighting

stops ashing and glows constantly, this means that

preheating is completed.

Notes:

- if the steam control knob (9) «

» is not set to

position «0», then when you turn on the co󰀨ee

maker with the button (15) « », the backlight of

Brayer BR1117 Инструкция по эксплуатации онлайн [7/68] 811626

Похожие устройства