Vitek VT-8250 Инструкция по эксплуатации онлайн [6/40] 811744
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-8250 Инструкция по эксплуатации онлайн [6/40] 811744

Vitek VT-8250 Инструкция по эксплуатации онлайн [6/40] 811744
6
ENGLISH
•
Unwind the power cord completely.
•
Install one of the attachments (8, 9 or 10). To do this,
insert the attachment into the installation place (1),
slightly push it, and make a clockwise turn. If the attach-
ment is set properly, you will hear the release button
(2) click.
• Before switching the unit on, make sure that your home
mains voltage corresponds to the unit operating voltage.
•
Make sure that the operation mode switch (4) is set to
the position «0».
•
Insert the power plug into the mains socket.
•
Set the required settings of the air flow using the
switch (4):
«0» – the hot air brush is switched off;
« » – «cool» air supply;
«1» – low air flow speed and low temperature;
«2» – high air flow speed and high temperature;
Note: During the first operation some foreign smell and a
small amount of smoke from the heating element is pos-
sible, it is normal.
•
After the hot air brush operation is finished, switch it
off by setting the switch (4) to the «0» position and
unplug it.
•
Wait till the hot air brush cools down.
•
To remove the attachment, pull the release button (2)
and turn the attachment counter-clockwise.
Overheating protection
Overheating protection switches the hot air brush off if
the outgoing air is too hot. If the hot air brush is switched
off during operation, set the switch (4) to the «0» position,
unplug the unit and make sure that the inlets and outlets
are unblocked. Let the unit cool down for 5-10 minutes and
switch it on again. Do not block the air inlets during unit
operation and avoid getting of hair into its air inlet.
CLEANING AND CARE
The нot air brush is intended for household use only.
•
Set the switch (4) to the «0» position, disconnect the hot
air brush from the mains and let it cool down.
•
To remove the attachment, pull the release button (2)
and turn the attachment counter-clockwise.

Похожие устройства

Скачать