Vitek VT-8355 Инструкция по эксплуатации онлайн [11/36] 811776
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-8355 Инструкция по эксплуатации онлайн [11/36] 811776

Vitek VT-8355 Инструкция по эксплуатации онлайн [11/36] 811776
11
ENGLISH
that, start ironing at higher temperature
(silk/wool). Cotton and linen items should
be ironed last.
• If an item is made of mixed fabrics, the iron
should be set to the lowest temperature
(for instance, if an item is 60% polyester and
40% cotton, it should be ironed at tempera-
ture used for polyester ironing «•»).
• If you cannot define the fabric structure, find
a spot that is inconspicuous when the item is
being worn and select the ironing temperature
experimentally (always start with the lowest
temperature and raise it gradually until you get
the desired result).
• Corduroy and other fabrics that become
glossy quickly should be ironed strictly in
one direction (in the direction of the pile) with
slight pressure.
• To avoid appearance of glossy spots on syn-
thetic and silk fabrics, iron them backside.
SETTING THE IRONING TEMPERATURE
• Place the iron on its base (9).
• Insert the power plug into the mains socket,
the indicator (7) will light up.
• Turn the control knob (11) to set the required
ironing temperature: «•», «••», «•••»,
«МАХ» (depending on the type of fabric).
•
When the soleplate temperature (14) reaches
the desired temperature, you can start ironing.
Notes:
• If you are ironing at high temperature but you
need to switch to lower temperature, wait until
the soleplate temperature decreases.
WATER SPRAY
• You can dampen the fabric by pressing the
water spray button (4) several times.
• Make sure that there is enough water in the
water tank (10).
DRY IRONING
• Place the iron on its base (9).
• Insert the power plug into the mains socket,
the indicator (7) will light up.
• Set the continuous steam supply knob (5) to
the position « » – the steam supply is off.
• Turn the control knob (11) to set the required
ironing temperature: «•», «••», «•••»,
«МАХ» (depending on the type of fabric).
•
When the soleplate temperature (14) reaches
the desired temperature, you can start ironing.
• After you finish ironing, set the temperature
control knob (11) to the «MIN» position.
• Pull the power plug out of the mains socket
and let the iron cool down completely.
STEAM IRONING
The iron is provided with an anti-drip valve that
stops water supply if the iron soleplate temper-
ature is too low, it prevents dripping from the
iron soleplate (14) openings. During heating and
cooling of the iron soleplate, you will hear charac-
teristic clicks of the anti-drip valve opening/clos-
ing, which indicates its normal operation.
While steam ironing it is necessary to set the iron-
ing temperature «•••», «МАХ».
• Place the iron on its base (9).
• Set the continuous steam supply knob (5) to
the position « » – the steam supply is off.
• Insert the power plug into the mains socket,
the indicator (7) will light up.
• Make sure that there is enough water in the
water tank (10).
• Turn the control knob (11) to set the required
ironing temperature: «•••», «МАХ».
• When the soleplate (14) reaches the set tem-
perature, you can start ironing.
• Turn the continuous steam supply knob (5) to
the position « » or « » – steam supply is on,
steam will start going out from the iron sole-
plate (14) openings.
• After you finish ironing, set the temperature
control knob (11) to the position «MIN», and
the continuous steam supply knob (5) to the
position « » – steam supply is off.
• Pull the power plug out of the mains socket
and let the iron cool down completely.
ATTENTION!
If the steam is not constantly supplied during
operation, check whether the temperature con-
trol knob (11) is set properly and there is water in
the water tank (10).
BURST OF STEAM
The burst of steam function is useful for iron-
ing folds and can only be used at high iron-
ing temperatures (when the temperature control
knob (11) is set to the position «•••», «МАХ»).
• When pressing the burst of steam button (3)
steam will go out of the iron soleplate more
intensively.
Note: To avoid water leakage from steam open-
ings, press the burst of steam button (3) with an
interval no less than 4-5 sec.

Похожие устройства

Скачать