Vitek VT-2433 Инструкция по эксплуатации онлайн [9/36] 811786
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-2433 Инструкция по эксплуатации онлайн [9/36] 811786

Vitek VT-2433 Инструкция по эксплуатации онлайн [9/36] 811786
9
ENGLISH
STEAM STATION VT-2433
The unit is intended for steam and dry ironing
and for vertical steaming of clothes, linen and
fabrics.
DESCRIPTION
1.
Steam station base
2.
Water tank
3.
Water tank lock
4.
Iron lock
5.
Iron lock release button
6.
Indication panel
7.
Control button
8.
Steam release button
9.
Iron handle
10.
Connecting hose protection
11.
Connecting hose storage area
Indication panel
12.
Power indicator
13.
Low water level indicator
14.
Self-clean indicator
15.
Temperature/steam release indicators
Attention!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal op-
eration current not exceeding 30 mA. To install an
RCD, contact a specialist.
SAFETY MEASURES
Before using the steam station, read this instruction
carefully. Keep these instructions for further refer-
ence.
Use the unit for intended purposes only, as speci-
fied in this manual. Mishandling the unit can lead
to its breakage and cause harm to the user or dam-
age to the user’s property, which is not covered by
warranty.
• Before switching the steam station on, make
sure that the mains voltage corresponds to the
unit operating voltage.
• The power cord is equipped with an “europlug”;
plug it into the socket with a reliable grounding
contact.
• To avoid fire, do not use adapters for connecting
the steam station to the mains.
• To avoid mains overloading, do not switch sev-
eral electrical appliances on with high power
consumption at a time.
• Do not use the unit outdoors.
• Do not store and do not switch the unit on
in places where highly inflammable liquids are
stored or used.
• Place the steam station on a flat steady surface.
Before placing the unit on the ironing board,
make sure that the ironing board is reliable and
steady.
• Before using the unit, examine the power cord
and the steam hose closely and make sure that
they are not damaged. If you find any damages
of the power cord or the steam hose, do not use
the unit.
• Do not use the unit near containers filled with
water, next to a kitchen sink or near a swim-
ming pool.
• If the unit is dropped into water, unplug it imme-
diately, and only then take it out of water.
• Avoid contact of the power cord or the hose of
the iron with hot surfaces and sharp furniture
edges.
• Do not leave the unit connected to the mains
unattended. Always unplug the unit before
cleaning or when you are not using it.
• Do not touch the steam station body, the iron,
the power cord or the power plug with wet hands.
• To avoid electric shock, do not immerse the
steam station body, the iron, the power cord and
the plug into water or other liquids.
ATTENTION! The iron soleplate and certain steam
station parts heat up during the operation. Keep
open skin areas away from direct contact with hot
surfaces to avoid burns; avoid the hot steam going
out from the soleplate openings
• Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals etc.
• When removing the water tank from the steam
station, switch the unit off and unplug it.
• Do not direct outgoing steam at people and ani-
mals.
• To avoid damaging the soleplate be very care-
ful when ironing clothes with metal zippers or
buttons.
• During the breaks between operation set the
iron on the steam station or on the base. After
the operation place the iron on the iron rest and
fix it by pressing the lock button.
• When you unplug the unit, always take it by the
power plug and disconnect it from the mains
socket, never pull the power cord.
• Pour out water from the water tank only after
switching the unit off and unplugging it.
• Clean the unit regularly.

Похожие устройства

Скачать