Coolfort CF-3206 Инструкция по эксплуатации онлайн [16/54] 811793
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Coolfort CF-3206 Инструкция по эксплуатации онлайн [16/54] 811793

Coolfort CF-3206 Инструкция по эксплуатации онлайн [16/54] 811793
16
ENGLISH
Perform scheduled cleaning in standby mode or in operat-
ing mode.
5. «Along the wall» cleaning mode button (42) « »
When this button is pressed, the cleaning along the wall
symbol is displayed on the remote control display.
Perform scheduled cleaning from standby mode or operat-
ing mode.
6. Spot/local cleaning button (44) « »
When this button is pressed, the spot cleaning symbol is
displayed on the remote control display.
Perform spot cleaning from standby or operating mode.
7. Suction control button (40) « »
Press this button repeatedly to control the suction mode
of the robot, and the icon on the remote control display
will appear according to the selected mode: - Quiet,
- Standard, - Intensive.
When the robot is running, press this button and the suc-
tion mode of the robot will switch between quiet mode /
standard mode / intensive mode.
8. Water control button (43) « »
By successively pressing this button, you can adjust the
intensity of water output from the tank (13), while the icon
corresponding to the selected water supply intensity will be
displayed on the remote control display:
– the water output from the tank is closed;
– the water output from the tank is minimal;
– the water output from the tank is average;
– the water output from the tank is the largest.
9. Clock setting button (45) « »
In standby mode, press the clock setting button (45), while
the remote control will enter the clock setting mode, the
clock setting symbol and the symbol for setting the current
day of the week will flash on the display. Select the current
day of the week by successive pressing of the buttons
and press the button to confirm. After the day has
been set, the hour setting symbols will flash on the display.
Select the current hours by successive pressing of the but-
tons and press the button to confirm, the minutes
setting symbols will flash. Select the current minutes by
successive pressing of the buttons and press the
button (45) « » to confirm.
(When setting hours/minutes, you can press the buttons
to switch between hour/minute settings)
Note:
–
If the buttons are not pressed within 15 seconds during
the setup process, the remote control will automatically
exit the setting mode.
–
To transfer the settings of the current time and date to
the robot, before pressing the button (45) « », align
the remote control emitter with the photodetector panel
(19) of the robot (point the remote control emitter at the
front panel of the robot) to prevent setting failure due to
the fact that the robot will not receive the signal. A cor-
responding voice signal will sound.
10. Scheduled cleaning setup button (41) « »
Press the button (41), and the remote control will switch
to the scheduled cleaning setup mode, the scheduled
cleaning setup symbol and the symbol for setting the
day of the week will flash on the display. Select the day
of the week by successive pressing of the and but-
tons, press the button to confirm the selected day of
the week, press the button to delete. This way you
can select the necessary days of the week for sched-
uled cleaning. When you press the or buttons, the
remote automatically confirms or deletes subsequent
days of the week. To confirm the selected days of the
week, press the button , the hour setting symbols
will flash on the display. Select the current hours by
successive pressing of the buttons and press the
button to confirm, the minutes setting symbols will
flash. By successive pressing of the buttons and
set the minutes, and to complete the setting, press the
button (41) « ».
(When setting hours/minutes, you can press the buttons
and to switch between hour/minute settings)
Note: To transfer the scheduled cleaning settings to the
robot, before pressing the button (41) « », align the
remote control emitter with the photodetector panel (19)
of the robot (point the remote control emitter at the front
panel of the robot) to prevent setting failure. A correspond-
ing voice signal will sound.
Quick User Guide
1. Install the self-cleaning station, installation recommen-
dations are given above.
Plug the power cord into a power outlet, an audible sig-
nal will sound and the operation indicator (26) will light
green.
2. Press and hold the button (2) « » of the robot, the start
button is turned on, and the robot starts.
3. The robot can be charged in two ways.
A. In standby mode or in working mode, press the but-
ton (37) « » of the remote control (RC) to make the
robot automatically return to the self-cleaning station to
charge the battery.
B. In standby mode or in working mode, press the button
(1) « » on the robot to automatically return to the sta-
tion to charge.
Note:
–
If the robot cannot be turned on due to low battery
power, manually move the robot to the self-cleaning
station for charging.
–
When installing the robot on the self-cleaning station,
pay attention to the position of bristles of the side
brushes (6). The bristles of the brushes must not inter-
fere with the charging contacts of the robot (7) and the
charging contacts of the self-cleaning station (28). If the
bristles are located above the robot contacts (7), turn
the brush (6) by the cord.
Attention! When using the self-cleaning station, press-
ing the button (2) « » on the robot or the button (39)
« » on the remote control interrupts charging and starts
cleaning.
4. Automatic charging
A. When the battery level is below 20%, the robot will auto-
matically start searching for a self-cleaning station to
charge.
B. When the robot finishes cleaning, it will automatically
switch to recharge mode and start looking for a self-
cleaning station to charge.
C. The sensing distance is a radius of 2 m from the self-
cleaning station to the base of the robot. Please make
sure the self-cleaning station is turned on and there are
as few obstacles in front of it as possible, otherwise the

Похожие устройства

Скачать