Ada : лазерный уровень TopLiner 3-360 Set + дальномер Cosmo 50 А00547 [12/58] Cosmo 50 12

COSMO 50

The volume value will be displayed in the main display area and the previous area value is displayed in the

rst line.

Indirect measurement

Pythagorean measurement is used in the condition that the objective needing to be measured is covered or

has no effective reecting surface and can’t be measured directly.

Make sure you adhere to the prescribed sequence of measurement:

All target points must be in a horizontal or vertical plane.

The best results are achieved when the instrument is rotated about a xed point (e.g. with the positioning

bracket fully folded out and the instrument placed on a wall) or the instrument is mounted on a tripod.

The minimum / maximum function can be used. The minimum value must be used for measurements at right

angles to the target; the maximum distance for all other measurements.

The best results are achieved when the instrument is rotated about a xed point (e.g. with the positioning

bracket fully folded out and the instrument placed on a wall) or the instrument is mounted on a tripod.