Ada лазерный уровень cube 2-360 basic edition + лазерный дальномер cosmo 70 А00701 PDF-инструкция онлайн [5/36] 814957

TO CHECK PLUMB

Choose a wall and set laser 5 m away from the wall. Hang a plumb with the

length 2.5 m on the wall. Turn on the line laser and make the vertical laser

line meet the point of the plumb. The accuracy of the line is in the range if

the vertical line doesn’t exceed (up or down) the accuracy that is shown in

the specications (±3 mm/10 m). If the accuracy isn’t corresponding with

claimed accuracy, contact the authorized service center.

Note: Because of construction of laser emitter laser beam may be unho-

mogeneous and has dierent intensity of brightness along the perimeter

in dierent light conditions. Unhomogeneous of laser beam: laser patch of

light but the center of laser beam is identied. Dierent laser beam bright-

ness: dierence of intensity is up to 50%.

CARE AND CLEANING

Please handle line laser with care. Clean with soft cloth only after any use.

If necessary damp cloth with some water. If instrument is wet clean and

dry it carefully. Pack it up only if it is perfectly dry. Transport in original

container/case only.

Note: During transport On/O compensator lock (5) must be set to posi-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;

• Dirty laser emitting window;

• After line laser has been dropped or hit. Please check the accuracy;

• Large uctuation of temperature: if instrument will beused in cold areas

after it has been stored in warm areas (or the other way round) please wait

some minutes before carrying out measurements.

English