Ada лазерный уровень CUBE 3-360, дальномер Cosmo 50, элевационный штатив-штанга А00696 PDF-инструкция онлайн [6/28] 814958

6 English

the vertical laser line on the wall and measure the distance 3m from point

B to another point C. Point C must be on the vertical laser line, it means the

height of C point is 3m.

Measure the distance from point A to point C, if the distance is over 2 mm,

please, contact with seller to calibrate the laser.

CARE AND CLEANING

Please handle measuring line laser with care. Clean with soft cloth only

after any use. If necessary damp cloth with some water. If instrument is

wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport

in original container/case only.

Note: During transport On/O compensator lock (5) must be set to posi-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;

• Dirty laser emitting window;

• After instrument has been dropped or hit. Please check the accuracy.

• Large uctuation of temperature: if instrument will be used in cold

areas after it has been stored in warm areas (or the other way round)

please wait some minutes before carrying out measurements.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

• It cannot be completely excluded that this instrument will disturb

other instruments (e.g. navigation systems);

• will be disturbed by other instruments (e.g. intensive electromagnet-

ic radiation nearby industrial facilities or radio transmitters).

LASER CLASS 2 WARNING LABELS ON THE LASER INSTRUMENT

LASER CLASSIFICATION

The line laser is a laser class 2 laser product accortding to DIN IEC 60825-