Contracor BlastRazor Z-200RC 10400201 Инструкция по эксплуатации онлайн [7/40] 815017

CONTRACOR

BlastRazor Z-100RC/BlastRazor Z-200RC Art.10400101/10400201

13. Connect abrasive blasting hose to hose coupling of the machine. Lock hose coupling

with a safety clip or wire.

14. Fill the machine tank with abrasive.

15. Put protective equipment on.

4. Abrasive blasting operations

4.1 Start up

1. Check all connections from compressor to the nozzle to ensure that they are properly

xed (badly xed air hose of the compressor cause a serious damage).

2. Ensure that abrasive blasting machine is lled with abrasive.

3. Ensure that the necessary safety measures for you and others are observed:

— protective equipment is used,

— puried air is fed to the helmet.

4. Always check position of RC handle lever, which should be in the safety position with the

holder in vertical position

5. Feed compressed air to the machine intake.

ATTENTION!

MACHINE MAXIMUM OPERATING PRESSURE — 10 bar.

6. Close both ball valves at the RC valve.

7. Ensure that there is no leak in the system. Air should come ONLY out of the vent under

the RC handle lever.