Home
Главная
Makita
Аккумуляторные
DUN461WSF
Инструкция к Makita LXT DUN461WSF Страница: 11

Makita DUN461WSF Инструкция к Makita LXT DUN461WSF онлайн [11/96] 818383

11 ENGLISH

FUNCTIONAL DESCRIPTION

CAUTION: Always be sure that the tool is

switched o󰀨 and the battery cartridge is removed

before adjusting or checking function on the tool.

Installing or removing battery cartridge

CAUTION: Always switch o󰀨 the tool before

installing or removing of the battery cartridge.

CAUTION: Hold the tool and the battery car-

tridge rmly when installing or removing battery

cartridge.Failuretoholdthetoolandthebattery

cartridgermlymaycausethemtoslipo󰀨yourhands

andresultindamagetothetoolandbatterycartridge

andapersonalinjury.

►Fig.2: 1. Red indicator 2. Button 3.Batterycartridge

Toremovethebatterycartridge,slideitfromthetool

while sliding the button on the front of the cartridge.

Toinstallthebatterycartridge,alignthetongueonthe

batterycartridgewiththegrooveinthehousingandslip

itintoplace.Insertitallthewayuntilitlocksinplace

withalittleclick.Ifyoucanseetheredindicatoras

showninthegure,itisnotlockedcompletely.

CAUTION: Always install the battery cartridge

fully until the red indicator cannot be seen. If not,

itmayaccidentallyfalloutofthetool,causinginjuryto

youorsomeonearoundyou.

CAUTION: Do not install the battery cartridge

forcibly.Ifthecartridgedoesnotslideineasily,itis

notbeinginsertedcorrectly.

Indicating the remaining battery capacity

Only for battery cartridges with the indicator

►Fig.3: 1. Indicator lamps 2. Check button

Pressthecheckbuttononthebatterycartridgetoindi-

catetheremainingbatterycapacity.Theindicatorlamps

light up for a few seconds.

Indicator lamps Remaining

capacity

Lighted O󰀨 Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

Thebattery

mayhave

malfunctioned.

NOTE: Depending on the conditions of use and the

ambienttemperature,theindicationmaydi󰀨erslightly

fromtheactualcapacity.

NOTE:Therst(farleft)indicatorlampwillblinkwhen

thebatteryprotectionsystemworks.

Tool / battery protection system

Thetoolisequippedwithatool/batteryprotectionsys-

tem.Thissystemautomaticallycutso󰀨powertothe

motortoextendtoolandbatterylife.Thetoolwillauto-

maticallystopduringoperationifthetoolorbatteryis

placed under one of the following conditions:

Overload protection

Whenthetoolorbatteryisoperatedinamannerthat

causesittodrawanabnormallyhighcurrent,thetool

automaticallystops.Inthissituation,turnthetoolo󰀨

and stop the application that caused the tool to become

overloaded. Then turn the tool on to restart.

Overheat protection

Whenthetoolorbatteryisoverheated,thetoolstops

automatically.Inthiscase,letthetoolandbatterycool

before turning the tool on again.

Overdischarge protection

Whenthebatterycapacityisnotenough,thetoolstops

automatically.Inthiscase,removethebatteryfromthe

toolandchargethebattery.

Switch action

WARNING: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

WARNING: For your safety, this tool is

equipped with the lock-o󰀨 button which prevents

the tool from unintended starting. Never use the

tool if it starts when you pull the switch trigger

without pressing the lock-o󰀨 button.Askyourlocal

Makita Service Center for repairs.

WARNING: Never disable the lock function or

tape down the lock-o󰀨 button.

NOTICE: Do not pull the switch trigger forcibly

without pressing the lock-o󰀨 button. The switch

maybreak.

►Fig.4: 1.Lock-o󰀨button2. Switch trigger

Topreventtheswitchtriggerfrombeingaccidentally

pulled,alock-o󰀨buttonisprovided.

Tostartthetool,pressthelock-o󰀨buttonandpullthe

switch trigger. Release the switch trigger to stop. The

lock-o󰀨buttoncanbepressedfromeithertherightor

left side.

Makita DUN461WSF Инструкция к Makita LXT DUN461WSF онлайн [11/96] 818383

Похожие устройства