AEG CLG330-K 4935472255 Инструкция к товару онлайн [9/365] 818860

ENGLISH

PLUMB FUNCTION PULSE MODE FUNCTION

With the plumb function, a point on the ﬂ oor can be projected perpendicularly to the ceiling.

The point of reference from the ﬂ oor is aligned to the intersection of the cross line on the

ceiling.

Use the plumb function e.g. to transfer reference point for light installation, vents, transfer of

heights.

For outdoor work under direct sunlight, or bright conditions and for extended indoor ranges of

up to 50 meters / 164 feet, use the pulse mode with a detector.

A detector is not included and must be purchased separately.

When the Pulse Mode is activated the laser beams will ﬂ ash at a very high frequency (invisible

to the human eye) this will allow the detector to locate the laser beams.

The pulse mode can be

activated in self-leveling

mode (A) or manual mode (B).

Press the P button, the green

LED next to it will light up.

When the Pulse Mode is

switched on, the visibility of the

laser beams are reduced a little

bit.

For information on how to

operate the detector, please

refer to the operating

instructions for the detector.

To switch oﬀ the Pulse Mode

press the P button again and the

green LED near it will turn oﬀ .