Condtrol GFX360 1-2-221 [10/21] Gfx 200 gfx 300 gfx 360 gfx 36

18 19

user manual

GFX 200/GFX 300/GFX 360/GFX 360

user manual

GFX 200/GFX 300/GFX 360/GFX 360

CROSS

LINE LASER

CROSS

LINE LASER

7.2. Check of vertical line

Use a plumb bob as a reference of a vertical line. Put the laser level at

1.5m distance from the plumb bob.

1. Move the switch bar on position ON, and align vertical laser line

with the low point of plumb bob.

2. If deviation between the laser line and the plumb line exceeds 0,3

mm per 1m of plumb bob length (for a 2.5m plumb bob deviation

shouldn’t exceed 0.7 mm) – please contact the service center.

8. CARE AND MAINTENANCE

Attention! This laser level is a precise optic-mechanical device and

requires careful handling. Before starting work, as well as after

mechanical influences (falling, bumps), check the accuracy of the

device.

Observation of the following recommendations will extend the life

of the device:

- Store the device, spare parts and accessories away from children and

unauthorized people.

- Transport the device with locked compensator only.

- Protect the device from bumps, falls, and excessive vibration; do

not let moisture, construction dust and foreign objects get inside the

device.

- In case moisture gets inside the device, first of all, remove the

batteries and then contact the service center.

- Do not store or use the device for a long time in high humidity

conditions.

- Check the accuracy of the device occasionally (check the paragraph

«Accuracy check»).

- Clean the device with a soft wet cloth. Do not use harsh chemicals,

cleaning solvents or cleaning agents.

- Wipe the laser aperture with a soft lint-free cloth and isopropyl

alcohol.

- Remove the Li-ion battery or alkaline batteries from the device

before connecting the charger, otherwise the device may fail.

1.5m