Ada 6D Servoliner А00621 Инструкция к товару онлайн [8/26] 818921

English

TO CHECK LEVEL

Choose a wall and set laser 5M away from the wall. mark cross point on

the wall. Turn the line laser so that the beam is displaced approximately

2.5m to the left. Horizontal line must be in the “accuracy” range (see specif.)

at the same height with the cross point. Repeat the same steps, moving

the laser level to the right. NOTE: do not displace the rotating axis when

checking.

CHECK PLUMB

Choose a wall and set laser 5m away from the wall. Hang a plumb line 2,5

m long. Turn on the laser and aim the vertical laser line to the plumb. The

accuracy of the line is in the range, if the vertical line doesn’t exceed (up or

down) the half of the value of the accuracy that is shown in the specica-

tions (±3 mm/10 m).

PRODUCT LIFE

Product life of the tool is 7 years. The battery and the tool should never

be placed in municipal waste. Date of production, manufacturer’s contact

information, country of origin are indicated on the product sticker.

CARE AND CLEANING

Please handle line laser with care. Clean with soft cloth only after any use.

If necessary damp cloth with some water. If instrument is wet clean and

dry it carefully. Pack it up only if it is perfectly dry. Transport in original

container/case only.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;

• Dirty laser emitting window;