Home
Главная
DWT
Сетевые ленточные шлифмашины
BS09-75 V 5.1.9
Инструкция к товару Страница: 17

DWT BS09-75 V 5.1.9 Инструкция к товару онлайн [17/136] 819174

English

Recommendations

on the power tool operation

Sanding belt selection

Use appropriate sanding belt for different materials or

coating being processed� The designation of the sand-

ing belt is specied on the packing. Relevant instruc-

tions may be provided by the seller�

Use sanding belts of different grain sizes depending

on works performed to guarantee best quality of pro-

cessing:

• use sanding belt with 40-60 grain size to process

wood or rough lumber, and to remove paint or rust

from surfaces;

• use sanding belt with 80-120 grain size to smooth

insignicant unevenness on wooden surfaces, to

sanding mastic, etc;

• use sanding belt with 180-320 grain size to nish

wooden surfaces and to sanding hard wood�

The data above are a recommendation only, the best

method to select the grain size for the treated material

is practical testing�

Sanding

Make a test sanding using a spare piece of the

blank part (made of the same material as the mate-

rial of the blank part) in order to make sure that the

sanding belt, grain size and the sanding belt speed

have been selected appropriately.

• Work using the least possible sanding pressure; the

power tool own weight is sufcient for a good sanding

performance� This gives longer life to the sanding belt,

makes the workpiece surface smoother�

• Start sanding after turning the power tool on� Stead-

ily move the power tool forward in overlapping, parallel

strokes along the bres. Transversal sanding affects

the quality of processing�

• Particularly when sanding coats of varnish, it is

possible that these melt and smear the surface of the

workpiece and the sanding belt� Therefore sanding

dust must be extracted�

• Worn or torn sanding belt may damage the surface

of the workpiece, therefore replace sanding belt when

required�

• Do not reuse sanding belt that were previously used

for sanding metal for any other materials�

Power tool maintenance /

preventive measures

Before carrying out any works on the power tool it

must be disconnected from the mains.

Cleaning of the power tool

An indispensable condition for a safe long-term exploi-

tation of the power tool is to keep it clean� Regularly

ush the power tool with compressed air thought the

ventilation slots 5�

After-sales service and application service

Our after-sales service responds to your questions

concerning maintenance and repair of your product as

well as spare parts� Information about service centers,

parts diagrams and information about spare parts can

also be found under: www.dwt-pt.com�

•

Transportation

of the power tools

Categorically not to drop any mechanical impact on

the packaging during transport�

• When unloading / loading is not allowed to use any

kind of technology that works on the principle of clamp-

ing packaging�

Environmental

protection

Recycle raw materials instead of

disposing as waste.

Power tool, accessories and packaging

should be sorted for environment-friendly

recycling�

The plastic components are labelled for categorized

recycling�

These instructions are printed on recycled paper man-

ufactured without chlorine�

The manufacturer reserves the possibility to introduce changes.

DWT BS09-75 V 5.1.9 Инструкция к товару онлайн [17/136] 819174

Похожие устройства