Home
Главная
Bort
Электрические
BHR-2000-Pro 91276070
Инструкция по эксплуатации Страница: 5

Bort BHR-2000-Pro 91276070 [5/26] Operation

ing time. The turbo nozzle combines the power of a nar-

rowhighimpactstreamandtheeciencyofa25degree

fan pattern. This swirls the narrow high impact stream

into a cone shape that cleans a larger area.

CAUTION: Since a turbo nozzle uses a narrow high im-

pact stream, only use it in applications where the clean-

ing surface cannot be damaged by narrow high impact

spray. Additionally, the turbo nozzle is NOT adjustable

and cannot be used to apply detergent.

DETERGENTS

The use of detergents can dramatically reduce cleaning

time and assist in the removal of dicult stains. Some

detergents have been customized for pressure washer

useonspeciccleaningtasks.Thesedetergentsareap-

proximately as thick as water. The use of thicker deter-

gents, such as dish soap, will clog the chemical injection

system and prevent the application of the detergent.

The cleaning power of detergents comes from applying

them to a surface and giving the chemicals time to break

down the dirt and grime. Detergents work best when ap-

plied at low pressure.

The combination of chemical action and high pressure

rinsingisveryeective. Onvertical surfaces,apply the

detergent starting at the bottom and work your way up-

ward. This will prevent the detergent from sliding down

and causing streaks. High pressure rinsing should also

progress from the bottom to top. On particularly tough

stains, it may be necessary to use a brush in combination

with detergents and high pressure rinsing.

OPERATION

The following cleaning procedure will help you to organ-

ize your cleaning task, and ensure that you achieve the

mostbenecialresultsintheshortestamountoftime.

Remember to use the spraying/cleaning techniques pre-

viously listed.

1. Surface preparation

Before starting a pressure wash cleaning job, it is impor-

tant to prepare the surface that is to be cleaned. This is

done by cleaning the area of furniture, and making sure

that all windows and doors are closed tight. In addition,

you should make sure that all plants and trees adjacent

to the cleaning area are protected by a drop cloth. This

will ensure that your plants won’t be sprayed by the de-

tergents.

2. Initial High Pressure Rinse

The next step is to spray the cleaning surface with water

toclearoanydirtorgrimethatmayhavecollectedon

the surface. This will allow your detergent to attack the

deep down dirt that has worked its way into the clean-

ing surface. Before triggering the gun, adjust the nozzle

to a wide fan pattern and slowly adjust to the desired

spray pattern. This will help you avoid applying too much

concentrated spray to the surface which could cause

damage.

3. Detergent Application

USE THE INSTRUCTIONS APPROPRIATE

FOR MODEL PURCHASED

NOTE: Use only detergents formulated for pressure

washes.

NOTE: Test detergent in an inconspicuous area before

•Remove additional debris by back-ushing water

through the nozzle. To do this, place end of a garden

hose ( with water running ) to end of nozzle for 30-60

seconds.

ANGLE TO THE CLEANING SURFACE

When spraying water against a surface, maximum im-

pact is generated when the water strikes the surface

“head on.” However, this type of impact tends to cause

dirt particles to imbed in the surface, thereby preventing

the desired cleaning action.

The optimum angle for spraying water against a cleaning

surface if 45 degrees.

Figure 6 - Optimum angle to cleaning surface

Spraying water against a surface at this angle provides

for the most benecial impact force combined with ef-

cientremovalofdebrisfromthesurface.

DISTANCE FROM CLEANLING SURFACE

Another factor that determines the impact force of the

water is the distance from the spray nozzle to the clean-

ing surface. The impact force of the water is increased as

the nozzle is moved closer to the surface.

HOW TO AVOID DAMAGING SURFACES

Damage to cleaning surfaces occurs because the impact

force of the water exceeds the durability of the surface.

The impact force can be varied by controlling the three

previously noted items. Never use a narrow high im-

pact stream or a turbo/rotary nozzle on a surface that is

susceptible to damage. Avoid spraying windows with a

narrow high impact stream or turbo nozzle as this may

cause breakage.

The surest way to avoid damaging surfaces is to follow

these steps:

1. Before triggering the gun, adjust the nozzle to a wide

fan pattern.

2. Place the nozzle approximately 4-5 feet from and 45

degrees to the cleaning surface, and trigger the gun.

3. Vary the fan pattern spray angle and the distance to

thecleaningsurfaceuntiloptimumcleaningeciencyis

achieved without damaging the surface.

TURBO NOZZLE

(NOT INCLUDED WITH ALL MODELS)

A turbo nozzle, sometimes referred to as a rotary nozzle,

isaveryeectivetoolthatcansignicantlyreduceclean-

Bort BHR-2000-Pro 91276070 [5/26] Operation

Содержание

Похожие устройства