Home
Главная
Bort
Электрические
KEX-3000 91276308
Инструкция по эксплуатации Страница: 4

Bort KEX-3000 91276308 Инструкция по эксплуатации онлайн [4/26] 822811

• Separate lance from gun.

• Rotate nozzle to the narrow stream setting. This opens

up the fan blades.

• Using included tip cleaner, or an unfolded paper clip,

insert wire into the nozzle hole and move back and forth

untildebrisisdislodged.(gure3.)

•Remove additional debris by back-ushing water

through the nozzle. To do this, place end of a garden

hose ( with water running ) to end of nozzle for 30-60

seconds.

ANGLE TO THE CLEANING SURFACE

(g4)

When spraying water against a surface, maximum im-

pact is generated when the water strikes the surface

“head on.” However, this type of impact tends to cause

dirt particles to imbed in the surface, thereby preventing

the desired cleaning action.

The optimum angle for spraying water against a cleaning

surface if 45 degrees.

Spraying water against a surface at this angle provides

for the most benecial impact force combined with ef-

cientremovalofdebrisfromthesurface.

DISTANCE FROM CLEANLING SURFACE

Another factor that determines the impact force of the

water is the distance from the spray nozzle to the clean-

ing surface. The impact force of the water is increased as

the nozzle is moved closer to the surface.

HOW TO AVOID DAMAGING SURFACES

Damage to cleaning surfaces occurs because the impact

force of the water exceeds the durability of the surface.

The impact force can be varied by controlling the three

previously noted items. Never use a narrow high im-

pact stream or a turbo/rotary nozzle on a surface that is

susceptible to damage. Avoid spraying windows with a

narrow high impact stream or turbo nozzle as this may

cause breakage.

6. water outlet(backside)

7. spray gun

8. power supply

9. poweron/o

* No. 2, 3, 8 are not included

PRE-OPERATION

ADJUSTING FAN PATTERN

Water can be sprayed with a narrow stream or fanlike.

The kit includes 4 nozzles with an unregulated spray an-

gle of 0

, 15

, 25

, 40

. Install the required nozzle before

startingwork,dependingonthetask(g2).

A narrow stream has high impact force on the cleaning

surface and results in maximum deep cleaning in a con-

centrated area. However, this narrow high impact spray

must be used cautiously, as it may damage some sur-

faces.

A wide fan pattern will distribute the impact of the water

over a larger area, resulting in excellent cleaning action

with a reduced risk of surface damage, Large surface

areas can be cleaned more quickly using a wide fan pat-

tern.

NOZZLE CLEANING INSTRUCTIONS

A clogged or partially clogged nozzle can cause a sig-

nicantreductionofwatercomingoutofthenozzleand

cause the unit to pulsate while spraying. To clean out the

nozzle:

•Turnoandunplugunit.

•Turnowatersupply.Relieveanypressuretrappedin

the hose by squeezing trigger 2-3 times.

RED

YELLOW

GREEN

WHITE

Figure 1

Figure 2

Figure 3 - Insert tip cleaner in nozzle hole and move back and forth until debris

is dislodged

Figure 4- Optimum angle to cleaning surface

Bort KEX-3000 91276308 Инструкция по эксплуатации онлайн [4/26] 822811

Содержание

Похожие устройства