Metabo Combo Set SB18LTBLSE+SSW400LTXBLSE 685221960 SB 18 LT BL SE онлайн [14/72] 824334
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Metabo Combo Set SB18LTBLSE+SSW400LTXBLSE 685221960 SB 18 LT BL SE онлайн [14/72] 824334

Metabo Combo Set SB18LTBLSE+SSW400LTXBLSE 685221960 SB 18 LT BL SE онлайн [14/72] 824334
ENGLISHen
14
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.
Do not allow battery packs to come into contact with
water!
Protect the environment, and do not dispose
of power tools and battery packs with house-
hold waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
Fig. L. We reserve the right to make technical
improvements.
U = Voltage of battery pack
n
0
= No-load speed
Tightening torque for screwing:
M
1
= Soft screwing application (wood)
M
3
= Hard screwing applications (metal)
M
4
= Adjustable torque
Max. drill diameter:
D
1 max
= in steel
D
2 max
= in softwood
D
3 max
= in masonry
s=Max. impact rate
m = Weight (with the smallest battery pack)
G=Spindle thread
D
max
= Chuck clamping range
Measured values determined in conformity with
EN 62841.
Permitted ambient temperature during operation:
-20 °C (-4°F) to 50 °C (120°F) (limited performance
with temperatures below 0 °C (32°F)). Permitted
ambient temperature for storage: 0 °C (32°F) to
30 °C (86°F).
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 62841:
a
h, ID
= Vibration emission value
(impact drilling in concrete)
a
h, D
= Vibration emission value
(Drilling in metal)
a
h, S
= Vibration emission value (screwing
without impact)
K
h, ...
= Uncertainty (vibration)
Typical A-effective perceived sound levels
:
L
pA
= Sound-pressure level
L
WA
= Acoustic power level
K
pA
, K
WA
=Uncertainty (noise level)
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
11. Environmental Protection
12. Technical Data

Похожие устройства

Скачать