STATUS 07125601: дрель-шуруповерт CT12-2Li + сабельная пила RS 500 Инструкция онлайн [3/36] 824544

INTENDED USE

GENERAL SAFETY RULES

INTENDED USE

GENERAL SAFETY RULES

The tool is suitable for sawing wood, metals, plastics or similar materials such as hard

rubber, bre glass, etc.

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

The term «power tool» in the warnings refers to your mains-operated (corded) power tool

or batteryoperated (cordless) power tool.

WORK AREA

• Keep work area clean and well lit. Cluttered and dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of

ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or

fumes.

• Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is earthed

or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

• Connect the electric power tool to electricity, using a 16 A maximum secure contact

protected outlet (220-240V~, 50 Hz). We recommend you to attach a residual current

circuit-breaker (RCD) that does not exceed 30mA.