Rothenberger SUPERTRONIC 2000 E 1000003389 Инструкция к товару онлайн [23/204] 824758

ENGLISH

 To insert the head into the adapter, move the mobile part of the latter counterclockwise until

it is completely inserted. This will spring back securing the head. To remove it, proceed in

likewise manner.

 Next insert the machine in the tube and make sure that it is securely guided into its housing

by the tube clamp bolt.

 Check that the reverse gear lever is correctly in place (arrow in working direction). Press the

electric switch with your right hand. Rotation will start immediately. Now the head should be

moved towards the tube to start the threading process by pressing on the machine.

 As soon as threading has begun, the head should be constantly and abundantly lubricated

with threading oil ROTHENBERGER.

 Once the appropiate threading length has been achieved (the tube of the threading head

should never overhang in a normal thread), stop the motor. Change the position of the re-

verse gear lever and start the motor. The machine will begin to unscrew the head and the

tube will become free.

ATTENTION! Fast speed must only be used to unscrew the head. Never thread on

fast speed!

4.4 Charger and battery (D)

Overview:

1 Battery pack 4 Warning display

2 Sliding seat 5 Capacity indicator button

3 Operation display 6 Capacity and signal indicator

Start of operation

Before plugging in, check to see that the rated mains voltage and mains fre-

quency, as specified on the rating label, match your power supply.

Devices such as this one, which generate direct current, may have an effect on basic residual-

current circuit breakers. Use type F or better, with a release current of max. 30 mA.

Before commissioning the charger, ensure that the air slots are free. Minimum

distance to other objects is 5 cm/ 2".

Self-test:

 Insert mains supply plug.

The warning display (4) and the operating indicator (3) light up one after the other for approx. 1

second and the installed fan runs for approx. 5 seconds.

Battery pack:

Charge the battery pack before use (1).

If performance diminishes, recharge the battery pack.

The ideal storage temperature is between 10°C / 50° F and 30°C / 86° F. The permissible stor-

age temperature is between 0°C and 50°C / 32° - 122° F.

Li-ion battery packs have a capacity and signal indicator: (6)

 Press the button (5), the LEDs indicate the charge level.

If one LED is flashing, the battery pack is almost flat and must be recharged.

Handling

Charging battery pack:

 Push the battery pack completely to the stop on the sliding seat (2).

The operating indicator (3) flashes.

Conservation charge:

Once the charging process has finished, the battery charger automatically switches to conserva-

tion mode.

Rothenberger SUPERTRONIC 2000 E 1000003389 Инструкция к товару онлайн [23/204] 824758

Похожие устройства