Timberk c WiFi N72, 100л. T-WSS100-N72-V-WF Инструкция по эксплуатации онлайн [32/68] 825287

IM2022

4. Screw the safety relief valve on the inlet nozzle, which is marked in blue and has a

water flow direction arrow in such a way that that the water flow coincides with the

direction of the arrow on the valve body. Put the water drainage tube* (water may

appear during heating) on the pressure relief port of the safety relief valve to allow

water drainage into the sewer (see Fig. 8) (the tube must be directed downwards and

must not be bent).

5. Connect the heater with the mounted valve to the water main and install the shut-off

valve at the water inlet point.

6. Connect the required number of water consumption points to the outlet nozzle

marked in red.

7. Open the shut-off valve of the water main and one of the outlet valves. When the

tank is full, which is prompted by water leaking from the outlet valve, close the outlet

valve and make sure that all connectors are tight.

* not included in the scope of delivery. New hoses must be used, old hoses must not

be reused

WARNING!

Do not operate the water heater without a safety relief valve installed on the inlet

nozzle.

WARNING!

The pressure-relief device must be activated on a regular basis to remove the scale

and ensure proper operation.

WARNING!

A discharge pipe connected to the pressure relief device installed downwards direction

and in a frost-free environment.

NOTE!

No additional accessories, such as a shut-off valve, must be mounted between the

safety relief valve and the inlet nozzle.

WARNING!

If water in the installation place has significant content of calcium, manganese or iron

salts, it is necessary to install a suitable filter in the water supply system in order to

reduce the amount of scale in the tank and on the heating element.

Connection to the electric main

WARNING!

Before connecting the tank water heater, make sure the water heater is properly

grounded. Proper grounding is important to minimize electrocution and fire hazard. The

power cord is equipped with a plug with a grounding contact. The product must be

used with a properly grounded main socket.