Home
Главная
P.I.T.
Насосные станции
POG900-P1
Инструкция к товару Страница: 4

P.I.T. POG900-P1 Инструкция к товару онлайн [4/19] 826135

Self-priming Pump

design, as well as the use of parts that

have not passed the tests and are not

approved for use by the manufacturer, are

prohibited.

► It is forbidden to pump explosive, flam-

mable, corrosive or health hazardous

substances, as well as water containing

mechanical impurities in the form of sand,

stones, etc.

► The pump is not suitable for pumping chlo-

rine-containing water in swimming pools.

► Not recommended for pumping drinking

water.

► When starting the pump for the ﬁ rst time,

ensure that it is completely ﬁ lled with wa-

ter. It is not allowed to operate the pump

without water consumption.

► Air entering the suction line is not allowed.

► To avoid freezing, the water must be com-

pletely drained from the pump and from

the suction and pressure lines.

Description of product and ser-

vices

Read all safety instructions and in-

structions.

Failure to follow the safety instructions and in-

structions can result in electric shock, ﬁ re and

/ or serious injury.

Please observe the illustrations at the begin-

ning of the operating instructions.

Intended use

The pumping station is designed to provide

constant pressure of clean water when ar-

ranging water supply systems, watering lawns

and irrigating garden plots, as well as for

pumping water from tanks or reservoirs.

The design of the pumping station (full auto-

mation, rare activation, supply of water under

pressure) allows the pumping station to be

used as an economical, maintenance-free

source of constant water pressure. Large

intake depth, water supply height and high

performance ensure the versatility of this

pumping station for any country house.

Pump device

The general view of the tool is presented on

the page with illustrations.

1.Pump

2.Tank (accumulator)

3.High pressure hose

4.Pressure switch

5.Manometer

6.Air valve

7.Water inlet

8.Water outlet

9.Filling hole

10.Drain hole

Technical data

Model POG1100-P2

Rated voltage 220 V~/50 Hz

Rated power 1100 W

Performance 2.8 m³/h

Lifting height 50 m

Suction depth 8 m

Accumulator volume 24 L

The weight 18 Kg

Contents of delivery

Self-priming pump 1 pc.

User manual 1 pc.

Note

Text and numbers may contain technical er-

rors and typographical errors. As the product

is constantly being improved, P.I.T. reserves

the right to make changes to the specifica-

tions and equipment of the product speciﬁ ed

here without prior notice.

Recommendations for use

During operation, in order to avoid an acci-

dent, it is recommended to check from time

to time the maximum head and power con-

sumption. A decrease in the maximum head

indicates wear, and an increase in energy

consumption indicates the presence of me-

chanical friction in the pumping station.

Check the accumulator air pressure monthly

through the air valve

an ordinary car pressure gauge. Before that,

you should disconnect the station pump from

the network and drain the water from the

pressure line.

If the mains voltage goes beyond the permis-

sible limits of 220V ± 10% or the ﬂ uctuation in

the voltage level is continuous, the pump per-

formance will not correspond to the declared

one. In this case, it is recommended to use a

mains voltage stabilizer to power the pump.

Preparation for work

Before first use or after long-term storage,

check the air pressure in the tank:

► Check the pressure in the nipple. The

pressure should be 1.5 ± 5% Of the atmo-

sphere;

► In case of insuﬃ cient pressure, increase it,

with increased pressure, release it;.

Note!

Inadequacy of the pressure to the

speciﬁ ed value can lead to failure of the tank

membrane. This malfunction is not covered

by the warranty.

P.I.T. POG900-P1 Инструкция к товару онлайн [4/19] 826135

Похожие устройства