P.I.T. POG900-P1 Инструкция к товару онлайн [6/19] 826135

P.I.T. POG900-P1 Инструкция к товару онлайн [6/19] 826135
Self-priming Pump
5
ing the switch to the “0” position. Remove the
plug from the socket.
Before long-term storage of the station, com-
pletely empty the tank and pump from water,
drain the water through the drain hole (10).
Attention!
Before disconnecting hoses
ALWAYS relieve pressure by turning on the
nearest valve.
Possible problems and malfunctions The
station does not start:
There is no mains voltage.
Check cable,
plug, connectors, fuse.
Overheating of the engine due to high
temperature of the pumped liquid.
Elim-
inate the cause of overheating and allow
the engine to cool down.
Overheating of the engine due to
blocked ventilation openings.
Eliminate
the cause of overheating and allow the en-
gine to cool down.
The residual current device has tripped.
Consult a qualifi ed electrician if the residu-
al current device trips again.
Defective engine.
Contact the service
center.
Insufficient pressure generated by the
pumping station:
There is not enough water in the suc-
tion line.
Ensure there is water in the suc-
tion line.
The suction line is not tight.
Check all
seals and connections on the suction line.
The suction lift is too high.
Reduce the
suction lift. The suction head must be sub-
tracted from the head.
Leakage between pump hydraulics and
motor.
Contact the service center.
The pump is clogged or defective.
Flush
the hydraulic end of the pump with clean
water.
Air in the pump or suction pipe.
Fill the
pump with water. If the suction line has a
non-return valve, fi ll it with water.
The pressure switch settings have
changed.
Contact the service center.
The suction line rests against the bot-
tom of the tank.
Fix or shorten the suction
line.
The pump does not turn off :
Defective On / Off switch.
Contact the
service center.
Service
Have your electrical equipment repaired
only by qualified personnel and only with
original spare parts.
The list of authorized service centers can be
found on the official website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
Storage:
drain the suction and discharge pipes
Unscrew the drain plug and let the water
drain out of the pump
Screw the drain plug again and store the
pump and accessories in a frost-protected
place, at a temperature of 0 to + 35 ° c and
a relative humidity of no more than 80%.
Products can be transported by any type
of closed transport in the manufacturer’s
packaging or without it, while preserving
the product from mechanical damage, at-
mospheric precipitation.
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials
must be recycled and reused in an envi-
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion
The fi rst and second digits of the product seri-
al number from left to right
Year of production, the third and fourth digits
indicate the month of production, the fth and
sixth digits indicate the production day.
TERMS OF WARRANTY SERVICE
1. This Warranty Certifi cate is the only docu-
ment that confi rms your right to free warranty
service. Without presenting this certifi cate, no
claims are accepted. In case of loss or dam-
age, the warranty certifi cate is not restored.
2. The warranty period for the electric ma-
chine is 12 months from the date of sale,
during the warranty period the service depart-
ment eliminates manufacturing defects and
replaces parts that have failed due to the fault
of the manufacturer free of charge. In the war-
ranty repair, an equivalent operable product
is not provided. Replaceable parts become
property of service providers.
P.I.T is not liable for any damage that may be
caused by operation of the electric machine.

Похожие устройства

Скачать