Fubag AGS7/0.2 110107 [2/14] Safety rules

Omperator's anual

www.fubag.ru

- 1 -

WARNING! READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE

AEROGRAPH.

QUALIFIED AND SPECIALLY TRAINED PERSONS ONLYAFTER PROPER READING

OF THIS MANUAL ISALLOWED TO USE AND TO MAINTAIN THISAEROGRAPH.

The detailed description, safety rules and all required information necessary for proper operation

and maintenance of FUBAG pneumatic aerographs are provided in this manual. Keep this

instruction manual by machine and refer to it if by any doubts concerning safe operation,

maintenance, storage and handling of FUBAG aerographs. Failure to follow these instructions could

result in the damages of aerograph and injury of the operator.

1. Safety rules

The aerograph must be used in a well operated area and kept away from sources of ignition

(open fire, lighted cigarettes, electric equipment).

- If you use solvents and detergents, it is important to pay special attention to the chemical

compatibility with aluminum and zinc. Don't use halogenated hydrocarbon-based solvents

and detergents (e.g., ethyl chloride, 1.1.1- trichlor), as explosive chemical reactions could

result from the contact of these agents with aluminum and zinc.

- Before disassembly make sure the aerograph is disconnected from compressed air and

fluid supply. To ensure immediate air supply cut-off use the ball valve.

- Some materials can cause intoxication, thus to work with them please use special

protective means: gloves, respirator, goggles, etc. One should also use ear protection

device when the appliance is used at the higher pressure.

Never direct the pneumatic tool or the jet of compressed air towards people, animals or

your own body. (Always wear safety goggles to protect your eyes from small dust particles

that may be lifted by the jet).

- Never direct the jet of compressed air towards the compressor.

- Never use the appliance in your bare feet or with wet hands or feet

- Never exceed the recommended operating pressure.

- Never use the spare parts and removable nozzles which are not original.

- Never use aerograph in food or chemical industry.

When connecting an air-powered tool to a hose of compressed air supplied by the

compressor, interruption of the flow of air from the hose is compulsory.

- Use of the compressed air requires compliance with the safety rules

Danger:

Caution: