Efco MTTH 2400 50359002E5 Инструкция онлайн [56/460] 830657

6.7 HANDGUARD LEVER

The front handguard lever prevents the operator’s hand from sliding towards the chain. This

lever is also used to operate the chain brake as it allows you to operate the chain brake if

pressed forward or due to the inertial effect of the mass contained therein in the event of a

kickback.

6.8 BAR COVER SHEATH

The bar cover sheath prevents contact with the chain teeth; the teeth are sharp even if the

chain is stationary. Insert it on the bar and chain when transporting and moving.

7 STARTING

7.1 FUEL

WARNING

Gasoline is an extremely flammable fuel. Use extreme caution when handling

gasoline or a fuel mixture. Do not smoke or bring any fire or open flames near the

fuel or the machine. Mix fuel outdoors where there are no sparks or open flames.

• To reduce the risk of fire and burns, handle fuel carefully. It is highly flammable.

• Shake and place the fuel in an approved fuel container.

• Place on clear ground, stop the engine and let it cool before refueling.

• Loosen the fuel cap slowly to release the pressure and to prevent fuel from spilling.

• Tighten the fuel cap securely after refueling. Vibrations can cause the cap to loosen and fuel

to leak.

• Wipe off any fuel that has spilled from the tank. Move the machine 3 meters away from the

refueling site before starting the engine.

• Never try to burn spilled fuel under any circumstances.

• Do not smoke when handling fuel or operating the machine.

• Store fuel in a cool, dry, well-ventilated place.

• Do not store the fuel in places with dry leaves, straw, paper, etc.

• Store the unit and fuel in places where fuel vapors do not come into contact with sparks or

open flames, water boilers for heating, electric motors or switches, ovens, etc.

• Do not remove the fuel tank cap when the engine is running.

• Do not use fuel for cleaning operations.

• Be careful not to spill fuel on your clothing.

This machine is driven by a 2-stroke engine and requires preliminary mixing of gasoline and 2-

stroke engine oil. Mix unleaded gasoline with two-stroke engine oil in a clean container

approved for gasoline.

Recommended fuel: this engine is certified to run on unleaded gasoline for motor vehicles

requiring an octane number of 89 ([R + M] / 2) or higher.