Home
Главная
Efco
Бензопилы
MT 4510 41 см 50239154E2
Инструкция Пила бензиновая EFCO MT 4510 (41 см) Страница: 29

Efco MT 4510 41 см 50239154E2 Инструкция Пила бензиновая EFCO MT 4510 (41 см) онлайн [29/214] 830966

Efco MT 4510 41 см 50239154E2 Инструкция Пила бензиновая EFCO MT 4510 (41 см) онлайн [29/214] 830966

29

I

GB

F

D

E

NL

GB

GR

TR

CZ

SK

RUS

UK

PL

H

LV

EST

LT

RO

· Select bare ground, stop engine, and allow to

cool before refueling.

· Loosen fuel cap slowly to release pressure and

to keep fuel from escaping around the cap.

· Tighten fuel cap securely after refueling. Unit

vibration can cause an improperly tightened

fuel cap to loosen or come off and spill

quantities of fuel.

· Wipe spilled fuel from the unit. Move 3 meter

away from refueling site before starting

engine.

· Never attempt to burn off spilled fuel under

any circumstances.

· Do not smoke while handling fuel or while

operating the chainsaw.

· Store fuel in a cool, dry, well ventilated place.

· Never place the machine in a combustible area

such as dry leaves, straw, paper, etc.

· Store the unit and fuel in an area where fuel

vapors cannot reach sparks or open flames

from water heaters, electric motors or switches,

furnaces, etc.

· Never take the cap off the tank when the

engine is running.

· Never use fuel for cleaning operations.

· Take care not to get fuel on your clothing.

This product is powered by a 2-cycle engine and

requires pre-mixing gasoline and 2-cycle oil.

Pre-mix unleaded gasoline and 2-cycle engine oil

in a clean container approved for gasoline.

RECOMMENDED FUEL: THIS ENGINE IS

CERTIFIED TO OPERATE ON UNLEADED GASOLINE

INTENDED FOR AUTOMOTIVE USE WITH AN

OCTANE RATING OF 89 ([R + M] / 2) OR HIGHER.

Mix 2-cycle engine oil with gasoline according to

the instructions on the package.

We strongly recommend the use of 2% (1:50)

Oleo-Mac/Efco two cycle engine oil, which is

specifically formulated for all air-cooled

two-stroke engines.

The correct oil / fuel proportions shown in the

table are suitable when using the Oleo-Mac/Efco

PROSINT 2 and EUROSINT 2 or an equivalent

high-quality engine oil (JASO specification FD

or ISO specification L-EGD).

GASOLINE OIL

2% - 50:1

ℓ ℓ

(cm

3

)

1

5

10

15

20

25

0,02

0,10

0,20

0,30

0,40

0,50

(20)

(100)

(200)

(300)

(400)

(500)

CAUTION: DO NOT USE AUTOMOTIVE OIL

OR 2-CYCLE OUTBOARD OIL.

CAUTION:

- Match your fuel purchases to your

consumption; don’t buy more than you

will use in one or two months;

- Store gasoline in a tightly-closed

container in a cool, dry place.



CAUTION - For the mixture, never use a

fuel with an ethanol percentage higher

than 10%; gasohol (mixture of gasoline and

ethanol) up to 10% ethanol or E10 fuel are

acceptable.

NOTE - Prepare only the quantity of mixture

required for immediate use; do not leave fuel in

the tank or a container for a long time. Were

commend the use of the additive Emak ADDITIX

2000 code 001000972 if the mixture is to be

stored for 12 months.

Alkylate gasoline



CAUTIONS – Alkylate fuels have different

density than normal fuel. Therefore

engines, set with normal fuel, need different H

jet regulation to avoid critical issues. For this

operation it’s necessary turned at a Licensed

Service Dealer.

FILLING THE TANK

Stir the mixture well before refuelling.



WARNING: Follow safety instruction for

fuel handling. Always shut off engine

before fuelling. Never add fuel to a machine

with a running or hot engine. Move at least 3

m from refuelling site before starting engine.

DO NOT SMOKE!

Похожие устройства