Crown CT20114 Инструкция к Crown CT20114 онлайн [4/118] 832159

b. And you should carry with you.

• Attached tools. • Properly reserved fuel. 'Spare blade. 'Whistle (for collaboration or emergency).

• Things to notify your working area (rope, warning signs). • Hatchet or saw (for removal of obstacles).

c. Never use the product when wearing pants with loose cuffs, when wearing sandals, or when barefoot.

Warning considering handling of fiiel

a. The engine of this product is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of

fuel or refill the fuel tank in any place where there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other

source of heat or fire which might ignite the fuel.

b. Smoking while operating the product or refilling its fuel tank is extremely dangerous. Always be sure to keep lit cigarettes

away from the product at all times.

c. When refilling the tank always turn off the engine first and take a careful look around to make sure that there are no sparks or

open flames anywhere nearby before refueling.

d. If any fuel spillage occurs during refueling, use a dry rag to wipe up spills before turning the engine back on again.

e. After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the product to a spot 3m or more away from

where it was refueled before turning on the engine.

NOTE

If fuel or product is ignited, please put out fire with dry powder fire extinguisher.

Before starting engine

1. The area within a perimeter of 15 m of the person using the product should be considered a hazardous area into which no

one should enter. If necessary, yellow warning rope, warning signs should be placed around the perimeter of the area. When

work is to be performed simultaneously by two or more persons, care should also be taken to constantly look around or otherwise

check for the presence and locations of other people working so as to maintain a distance between each person sufficient to

ensure safety.

2. Check the condition of working area to avoid any accident by hitting hidden obstacles such as stumps, stones, cans, or

broken glass.

3. Always ensure all handles and guards are fitted when using the machine. Never attempt to use an incomplete machine or

one fitted with an unauthorized modification.

4. Do not operate the machine with a damaged or excessively worn cutting device.

A IMPORTANT. Remove any obstacle before beginning work.

5. Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cutting attachment is properly installed and

securely fastened.

Starting the engine

1. Keep bystanders, especially children, and animals at least 15 m away from the operating point. If you are approached,

immediately stop the engine.

2. The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to move as soon as the

engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat

clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any

obstacle when the engine starts.