Crown CT20114 Инструкция к Crown CT20114 онлайн [5/118] 832159

А WARNING

• Never place the throttle into the high-speed position when starting the engine.

• Never start the engine at the cutting attachment side.

3. After starting the engine, check to make sure that the cutting attachment stops moving when the throttle is moved fully back

to its original position. If it continues to move even after the throttle has been moved fully back, turn off the engine and take the

unit to your authorized servicing dealer for repair.

Using the product

A IMPORTANT

Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual.

1. Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the

width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even

posture while working.

2. Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above

the level necessary.

3. If the unit starts to shake or vibrate, turn off the engine and check the whole unit. Do not use it until the trouble has been

properly corrected.

4. Keep all parts of your body away from moving cutting attachment and hot surfaces.

5. Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after

shutting down the engine. Doing so could result in serious burns or electrical shock.

6. While operating the machine be always sure of a safe and secure operating position especially when using steps or a ladder.

7. Always be aware of you surroundings and stay alert for possible hazards that you may not hear due to the noise of the

machine.

8. To reduce fire hazard keep engine and silencer tree of debris, leaves, or excessive lubricant.

9. Stop the engine before:

• Cleaning or when clearing a blockage;

• Checking, maintenance or working on the machine.

> IF SOMEONE COMES

1. Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you

are approached. Injury may result from flying debris.

2. If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

Avoid operating while people, especially children are nearby.

Maintenance

1. Do not attempt to repair the machine unless you are qualified to do so.

2. In order to maintain your product in proper working order, perform the maintenance and checking operations described in the

manual at regular intervals.

3. Always be sure to turn off the engine before performing any maintenance, checking procedures or working on the machine.

A WARNING The metallic parts reach high temperatures immediately after stopping the engine.

4. When replacing the cutting attachment or any other part, or when replacing the oil or any lubricant, always be sure to use only

High Quality products.