Crown CT20114 Инструкция к Crown CT20114 онлайн [6/118] 832159
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Crown CT20114 Инструкция к Crown CT20114 онлайн [6/118] 832159

Crown CT20114 Инструкция к Crown CT20114 онлайн [6/118] 832159
E
N
5
3. Push the primer several times until overflow fuel flows out in the clear tube.
5. In the event that any part must be replaced or any maintenance or repair work not described in this manual must be
performed, please contact a representative from the store nearest authorized servicing dealer for assistance.
6. Do not use any accessory or attachment other than those were recommend for the unit.
7. Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product
becoming damaged during operation or the product becoming unable to operate properly.
Handling fuel
1 .The engine is designed to run on a mixed fuel, which contains highly flammable gasoline. Never store cans of fuel or refill the
tank of the unit in any place where there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other source of
heat or fire which might ignite the fuel.
2. Handle fuel with care, it is highly flammable. Never smoke while operating the unitor refilling its fuel tank.
3. When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look around to make sure that
there are no sparks or open flames anywhere nearby before refueling.
4. Wipe spilled fuel completely using a dry rag if any fuel spillage occurs during refueling.
5. After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 3 m or more away from
where it was refueled before turning on the engine.
6. Do not inhale fuel fumes as they are toxic.
Transportation
1. When hand-carrying the product, cover over the cutting part if necessary, lift up the product and carry it paying attention to
the blade.
2. Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If
doing so, fuel might leak from the tank during transport.
3. When transporting or storing the machine always fit the cutting device guard.
4. FUEL AND OIL
Carburant
Use a mixture of normal-grade unleaded gasoline (with or without lead, alcohol-free) and a quality 2-stroke engine oil.
5. OPERATING
Starting engine
A WARNING The cutting head will start moving upon the engine starts.
1. Feed fuel into the fuel tank and tighten the cap securely.
2. Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start moving
upon starting of the engine.
Recommended mixing ratio:
Condition
Up to 20 hours
use
After 20 hours
Gasoline:
Oil
25:1 40:1
40:1
Mixing
2-cyde oil
Gasoline
1 2 3 4 5
40 80 120 163 200
Fig. 1

Похожие устройства

Скачать