Briggs & Stratton 1022 E 1696720 Инструкция к Briggs&Stratton 1022 E 1696720 онлайн [14/212] 832275

Not for

Reproduction

Problem Cause Solution

The choke is open. Turn the choke to the CLOSED position before you

pull the starter rope.

The engine is flooded. Turn the choke to open position. Pull the starter

rope several times until the engine starts.

Water is in the fuel or old fuel. Fill the fuel tank with fresh fuel.

The chute rotation or deflector adjustment does not

work.

The chute or deflector is frozen. Keep the snowthrower in a warm area until the

snow or ice melts.

Incorrect oil Change oil to lighter viscosity.The engine is hard to start or operates poorly.

The choke control is set incorrectly. As the engine warms, gradually open the choke

control.

Too much vibration. Loose or damaged parts Stopthe snowthrower immediately. Contact an

Authorized Service Dealer.

The control cable requires adjustment. SeeAdjust the Auger Control Cable.The snowthrower does not throw snow.

Snow is in the discharge chute. STOP THE ENGINE! Make sure that the auger

STOPS. Use a clean-out tool to remove snow

from the discharge chute. Do not clean a clogged

discharge chute with your hands! SeeCleaning a

Clogged Discharge Chute.

For all other issues, please see an Authorized Service Dealer.