Home
Главная
Briggs & Stratton
БЕНЗИНОВЫЕ СНЕГОУБОРЩИКИ
1022 E 1696720
Инструкция к Briggs&Stratton 1022 E 1696720 Страница: 13

Briggs & Stratton 1022 E 1696720 Инструкция к Briggs&Stratton 1022 E 1696720 онлайн [13/212] 832275

Not for

Reproduction

Storage

Storage - Fuel System

Fuel can become stale when kept in a storage container

for more than 30 days. Each time you fill the container with

fuel, addSTA-BIL 360°

PROTECTION™fuel stabilizerto

the fuel as specified by the manufacturer’s instructions. This

keeps fuel fresh and decreases fuel-related problems or

contamination in the fuel system.

It is not necessary to drain fuel from the engine whenSTA-

BIL 360°

PROTECTION™fuel stabilizeris added as

instructed. Before storage, turn the engine ON for 2 minutes

to move the fuel and stabilizer through the fuel system.

Off-Season Storage

At the end of the season, or when the unit is in storage for

more than 30 days, complete the steps that follow.

WARNING

Gasoline is highly flammable and its vapors are explosive.

Fumes can move to a distant ignition source and an

explosion and/or fire can result.

• If fuel is in the tank, do not keep the unit indoors or

in poorly ventilated areas where fumes could reach

sparks, open flames, pilot lights, heat, and other ignition

sources.

Snowthrower

• Clean the unit. Make sure that all nuts, bolts, and screws

are tightened.

• Examine visible moving parts for damage, breakage,

and wear. Replace if necessary.

• Lubricate the control lever linkages, chute and

deflector, auger assembly, and drive wheel axles.

SeeMaintenance and Adjustments.

• For rusted or chipped paint surfaces, sand lightly and

apply touch-up paint.

• For unpainted or bare metal surfaces, apply a rust

preventative product.

• Keep the unit indoors and cover it. If kept outdoors,

cover it with a heavy tarpaulin.

Returning the unit to Service

• Contact an Authorized Service Dealer for annual

maintenance tasks. SeeMaintenance Schedule.

• Inspect engine oil level and add oil, if necessary.

• Fill the fuel tank with clean fuel.

• Check tire pressures.

• Make sure that all guards, shields, and covers are

attached.

• Make sure that all fasteners are tightened.

• Inspect the auger and impeller control, and the traction

drive control.

Troubleshooting

Problem Cause Solution

The auger does not stop when the auger control is

released.

The control cable requires adjustment. SeeAdjust the Auger Control Cable.

The auger does not turn when the auger control is

engaged.

The control cable requires adjustment. SeeAdjust the Auger Control Cable.

The key is set to the OFF position. Turn the key to the ON position.

The primer button was not pushed 2-times before

the starter rope was pulled.

Push the primer button 2-times before you pull the

starter rope.

The engine does not start.

The fuel tank is empty. Fill the fuel tank with fresh fuel.

Briggs & Stratton 1022 E 1696720 Инструкция к Briggs&Stratton 1022 E 1696720 онлайн [13/212] 832275

Похожие устройства